About ePad Software ........... 1 Included in the Box ............. 1 2. ePad Installation ............2 System Reqirements ............ 2 Getting Used to Signing on the ePad ......3 3. Troubleshooting ............4 Appendix A, Miscellaneous ........5 Specifications .............. 5 Technical Support ............
Page 4
This legal document is an agreement between you as the end-user (hereinafter, the “Licensee”) and Interlink Electronics, Inc. (“Licensor”). BY USING THE ePad SOFTWARE (the “Software”), YOU ARE AGREEING TO BECOME BOUND BY THE TERMS OF THIS AGREEMENT. THIS AGREEMENT CONSTITUTES THE COMPLETE AGREEMENT BETWEEN LICENSEE AND LICENSOR.
PC applications. Designed to mimic the natural feel of signing on paper, ePad can be used on the desktop, yet it’s small and light enough to take on the road.
• Mouse or other pointing device CD ROM Turn off computer Software Drivers Plug ePad into a serial port Installation for Turn on your computer and allow Windows operating Serial Device system to boot up Insert the CD-ROM into the CD-ROM drive For Windows 95, 98, ME, and 2000 A.
Paint Program found under Accessories in the Windows Start Menu (Click Start, select Program Files, Accessories, and then Paint). This will help you to make your signature on the ePad more like your pen-on- paper signature. TIP: The biggest difference between signing documents electronically on your new ePad versus on paper is the absence of ink coming out of the pen.
Troubleshooting Having Trouble? Try the following tips to get your ePad up and running: • For the serial ePad, make sure you are running Windows 95, 98, NT, 2000, or ME. For the USB ePad, make sure you are running Windows 98, 2000 or ME.
Compatibility: ePad Hardware only: DOS, Windows 3.x, 95, 98, NT, 2000, ME; with WinTab driver installed: Windows 95, 98, NT, 2000, ME for serial ePad; Windows 98, 2000, ME for USB ePad Actuator Type: Optimized for: Ordinary stylus. Also works with: Finger, gloved hand, ball...
Technical Support If you have any difficulties installing or using your ePad, please re-check the section of this User’s Guide that relates to your problem. If you are still unable to solve the problem, please call our Product Support team for assistance.
Page 11
(as explained in paragraph 3), inclusive of Product’s serial number: The address where you should send the Product to receive warranty service is: Product Support INTERLINK ELECTRONICS, INC. 546 Flynn Road, Camarillo, CA 93012 RMA Number ____________ INTERLINK assumes no risk for damage or loss in shipment. If, in INTERLINK’s sole opinion, the Product failure is not covered under this...
Need help?
Do you have a question about the ePad and is the answer not in the manual?
Questions and answers