Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Solartron Metrology MACH 1 Series
Summary of Contents for Solartron Metrology MACH 1 Series
- Page 2 1.0: General The Mach 1 Series range of Transducer coil sensitivity in mV output / V energising / mm travel. assemblies are designed for protection against dust and water, making them suitable for use in harsh 1.2 Installation environments. Designed to be rugged and yet still cost effective, these devices offer the Customer all L.V.D.T.
- Page 3 1.0: General Irrespective of clamping method care must be taken 1.4. Carriers not to over tighten retaining screws as distortion of the body may prove damaging to the integrity of the A standard length carrier is available for each model of transducer and adversely affect the geometry of the transducer, manufactured from 316 stainless steel and installation.
- Page 4 Side forces which may exert undue 1.8. Cable pressure and flex the carrier must be avoided. 5 kHz Version: Solartron Metrology cable is specially 1.7. Rod End Bearings manufactured to optimise performance with respect to temperature, chemical resistance, flex life, abrasion 1.7.1.
- Page 5 If fitted to non-Solartron Metrology equipment, careful observation of connections must be adhered * An explanation of codes can be found on our ordering guide to as Solartron Metrology cannot be held responsible 502103 available from sales.solartronmetrology@ametek.com for any damage which may result.
- Page 6 ------------------------------------------------------------ Solartron Metrology, Bognor Regis, accepts no responsibility for damage when accessories are fitted by the Customer. In the event further information being required please contact your representative. 1.0: General...
Need help?
Do you have a question about the MACH 1 Series and is the answer not in the manual?
Questions and answers