2.2.1
All mode switches must be in OFF position during operator panel use.
The mode switches should not be touched unless by qualified personnel.
2.2.2
For information about the cables to be used when connecting the operator panel to
the controller, please refer to the help file for the driver in question.
2.2.3
Cables, peripheral equipment and accessories must be suitable for the application
and its environment. For further details or recommendations, please refer to the
supplier.
Caution:
When using a compact flash card, do not remove the card when the busy indicator is
illuminated.
Mitsubishi Electric, MA00776E
Mode Switches
Connections to the Controller
Other Connections and Peripherals
Installation
10