1. Manuals
  2. Brands
  3. Costar Manuals
  4. DVR
  5. COSCR04CH20-2TB
  6. User manual

Costar COSCR04CH20-2TB User Manual

4/8/16 channel dvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
4/8/16 Channel DVR (Digital Video Recorder)
Please read this manual thoroughly before use and keep it handy for future reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the COSCR04CH20-2TB and is the answer not in the manual?

Questions and answers

Related Manuals for Costar COSCR04CH20-2TB

Summary of Contents for Costar COSCR04CH20-2TB

  • Page 1 User Manual 4/8/16 Channel DVR (Digital Video Recorder) Please read this manual thoroughly before use and keep it handy for future reference.
  • Page 2 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EX- POSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
  • Page 3 FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC INFORMATION: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of...
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

  • Page 5: Table Of Contents

    Table of Contents Table of Contents ..........................1 Overview Package Contents ........................4 DVR Description ......................... 4 Installation Installing HDD ........................... 8 Connecting with Exterior Device ....................8 Starting System ........................10 Quick Setup ..........................11 2.4.1 Account........................11 2.4.2 System ........................
  • Page 6 4.2.4 Configuration (Config) ....................39 CAMERA ..........................41 4.3.1 Basic .......................... 41 4.3.2 Advanced ........................44 DEVICE ........................... 48 4.4.1 Display ........................48 4.4.2 Disk ........................... 53 4.4.3 PTZ > PTZ ......................... 56 4.4.4 Serial Device > Serial Device ..................57 4.4.5 TEXT >...

  • Page 7: Overview

    Overview This chapter describes DVR overview, components and their terms and features. This manual introduces a digital video recorder (DVR) which monitors or record, controls images a camera. Multiple users may monitor video at the same time, and many cameras can be controlled simultaneously by a manager.

  • Page 8: Package Contents

    Package Contents The device package contents consist of the following: Note Please check all components involved. Table 1-1 Package contents Name Name SATA cable DC Power Adapter & Power cord SATA power cable Mouse HDD fixing screw Quick guide Rack mount bracket (8/16ch only) Program CD Bracket fixing screw (8/16ch only) DVR Description...
  • Page 9 4ch DVR(2HDDs) 8ch DVR(2HDDs) 16ch DVR(4HDDs) Figure 1-2 Name and Connection of each rear section of 4ch, 8ch and 16ch DVR Table 1-3 Name and Function of each rear section of 4ch, 8ch and 16ch DVR Name Function Audio In Camera audio input port.
  • Page 10 Name Function DC12V Connector with power supply. Power Switch Power On-Off. User Manual...

  • Page 11: Installation

    Installation This chapter describes the way to install DVR. When installing a device, connect rear of the device with each port on the basis of below connection map. Figure 2-1 Connection map The device starts first like below sequences: 1 Installing HDD. 2 Connecting with an exterior device.

  • Page 12: Installing Hdd

    Installing HDD How to install HDD in the device: ▪ Withdraw the mains plug before installing HDD to reduce the risk of injury or electrical shock, or device malfunction. Attention ▪ Make sure to check the compatibility of HDD with the device. 1 Always switch off and unplug the unit.
  • Page 13 6 Connect a monitor with VGA, HDMI or CVBS port. 7 Connect a network port. 8 Connect an alarm and RS485 devices. 9 Connect USB port in front or rear section of the unit with a mouse or other USB devices. 10 Connect DC12V adapter.

  • Page 14: Starting System

    Starting System Power supply begins with system operation as follows: 1 Switching on initialize with below icons in order. Note Installing new HDD might take more initialize time. 2 With buzzer sounds, the start screen is presented. 3 In Log in screen, enter the ID, Password and press OK. Default ID &...

  • Page 15: Quick Setup

    Quick Setup First start of the system operates Easy Installation as follows: 1 Account 2 System 3 Network 4 Time/Date 5 Record 2.4.1 Account How to set Account of Easy Installation: 1 Click the keyboard icon to set ID and Password users want. 2 With keyboard UI, set the ID and Password, and press OK.

  • Page 16: System

    2.4.2 System How to set the system of Easy Installation: 1 Set each item in System setting screen. System Mode: Select input video type (Analog Only or Analog + IP cam)  Language: Select system language.  Device Name: Enter the device name. ...

  • Page 17: Time/Date

    3 Press Next to end Network setting and move the next setting phase. 2.4.4 Time/Date How to set the time/date of Easy Installation: 1 Set each item in Time/Date setting screen. Network Time Sync: Select network for synchronizing with time server. ...

  • Page 18: Easy Installation Wizard

    Select if audio record or not.  Click Calculation to see recommended frame rate and resolution.  2 Press Save button to save set value. 3 Press Next to end Network setting and move the next setting phase. 2.4.6 Easy Installation Wizard Select to run Easy Installation every time when the system start.

  • Page 19: Live Screen Configuration

    Live Screen Configuration UI screen is configured like below figure. Figure 3-1 UI Screen Configuration Table 3-1 Items and Description of UI Screen Configuration Item Description Setup menu Setting menu is located in the corner of upper screen. See “4 Setup menu”...

  • Page 20: Icons In Live Screen

    Icons in Live screen Each icon in the live screen displays a present setting status or a function. UI screen consists of like below. Chosen live screen is marked as a blue frame; mouse-located live screen is marked Note as yellow one. Figure 3-2 Live screen icon Table 3-2 Live screen icon and its description Icon...

  • Page 21: Live Launcher Menu

    Live Launcher menu This chapter describes Launcher menu in the bottom of the screen. Figure 3-3 Launcher menu Table 3-3 Launcher menu Item and Description Item Description Log in/out status and logged in ID. Date & Time Displaying present date and time. Displaying HDD capacity in use.

  • Page 22: Backup

    3.2.1 Backup The device provides a back-up function of live screen. Figure 3-4 Backup Table 3-4 Backup Item and Description Item Description Select CH Selecting a channel, user want to back-up. Select All/ Select or clear all channels. Unselect All Start Setting back-up start time (Bookmark: bookmark list).
  • Page 23 The hash information can be used to verify the forgery of the backup file. Calculate Calculating data capacity to back-up. Format Formatting the device to back-up. Start Starting back-up. Cancel Closing the backup screen. Select Backup Mask and click SET button to open the Privacy Mask pop-up window. Figure 3-5 Backup Mask Table 3-5 Backup Mask Item and Description Item...

  • Page 24: Quick Menu

    Quick menu This chapter depicts Quick menu when users click the right button of the mouse in live screen. Figure 3-6 Quick menu Table 3-6 Quick menu Item and Description Item Description Screen Mode Selecting the partition mode of live screen (Full, 2X2, 3X3, and 4x4). Zoom in Magnifying selected live screen (Zoom out, 2 times, 4 times, and 8 times).
  • Page 25 Item Description Shutdown Shuts down or restarts the device (shutdown). User Manual...

  • Page 26: Ptz Control

    3.3.1 PTZ Control The location of images may be moved to monitor with PTZ ball. PTZ Control menu can be displayed if relevant channel’s protocol is set in DEVICE > Note PTZ in the upper live screen. Figure 3-7 Quick menu > PTZ Control Table 3-7 Quick menu >...

  • Page 27: Camera Registration

    In PTZ Control screen, clicking the right button of the mouse displays Quick menu. Figure 3-8 PTZ Control Quick menu Table 3-8 PTZ Control Item and Description in Quick menu Item Description Preset, Tour, Run PTZ functions. Scan, Pattern Exit Transforming to live screen menu in PTZ Control menu.
  • Page 28 Table 3-9 Camera Registration Item Description Search the connected IP cameras. Auto Assign Automatically assign the channel windows. Port Show the detected camera port. Assign Selecting the channel windows manually. Model Show detected camera model number. Show detected camera IP address. Status Show connection status.

  • Page 29: Status > System Log

    Item Description OnVIF URL Enter camera IP address. RTSP URL Enter Primary and Secondary RTSP IP address and URL. OnVIF Port Enter web port. Default port is 80. RTSP Port Enter RTSP port. Default port is 554. Mode Select video stream format (RTSP/HTTP). 3.3.3 Status >...

  • Page 30: Status > Event

    3.3.4 Status > Event Users can see the real-time event information of the unit in Event tap in Status screen. Figure 3-12 Status > Event in Quick menu Table 3-12 Status > Event Item and Description in Quick menu Item Description Temporary fixing or releasing an event list (toggle).

  • Page 31: Status > Record

    3.3.5 Status > Record Users can see the recording status in Record tap in Status screen. Figure 3-13 Status > Record in Quick menu Table 3-13 Status > Record Item and Description in Quick menu Item Description Record time Marking recorded period. Record list Displaying the record setting status.

  • Page 32: Status > Disk

    3.3.6 Status > Disk Users can see the disk status in Disk tap in Status screen. Figure 3-14 Status > Disk in Quick menu Table 3-14 Status > Disk Item and Description in Quick menu Item Description Disk Info Display disk temperature and S.M.A.R.T information. Rec.

  • Page 33: Setup Menu

    Setup menu This chapter describes Setup menu in the upper side of the screen. Figure 4-1 Setup menu Selecting the menu opens the setting screen. Setup screen is available to click Setup in Quick menu by clicking the right button Note of the mouse.
  • Page 34 Setup menu includes: Table 4-2 Setup menu tree 1 Depth 2 Depth 3 Depth System System F/W Upgrade Time/Date Time/Date Holiday SYSTEM Account User Export/Import Configuration Factory Default Basic Basic Audio In/Out CAMERA Scan Mode Advanced Advanced Display Spot Display Sequence DEVICE Setup...

  • Page 35: General Buttons In Setup Menu

    1 Depth 2 Depth 3 Depth Video Loss Setup Periodic Notification Schedule Basic WAN Port DVRNS/Dashboard DVRNS/DDNS DDNS E-Mail E-Mail NETWORK Notification Server Notification Server Notification Message General buttons in Setup menu This section depicts General buttons in Setup menu. Figure 4-2 General buttons in Setup menu Table 4-3 Item and Description of General buttons in Setup menu Item...

  • Page 36: System

    Item Description Restore Cancel the set value and reverse it to default. Apply Apply the content set. SYSTEM In SYSTEM, basic system environment is set. 4.2.1 System Set and upgrade the basic items of the system. System > System Set the basic items in the System. Figure 4-3 SYSTEM >...
  • Page 37 If change video type, system will reboot, and all setup go to factory default. Warning System > F/W Upgrade Set the upgraded items of the system. Figure 4-4 SYSTEM > System > F/W Upgrade Table 4-5 SYSTEM > System > F/W Upgrade Item and Description Name Function Current Version...

  • Page 38: Time/Date

    4.2.2 Time/Date Set the date, time, and holidays of the system. Time/Date > Time/Date Set the date, time, and holidays of the system. Figure 4-5 SYSTEM > Time/Date > Time/Date Table 4-6 SYSTEM > Time/Date > Time/Date Item and Description Name Function System Time...
  • Page 39 Time/Date > Holiday Set holidays of the system. Figure 4-6 SYSTEM > Time/Date > Holiday Table 4-7 SYSTEM > Time/Date > Holiday Item and Description Name Function Year Select years to set holidays. Delete selected holidays. Add Holiday Add holidays. List Display added holiday lists.
  • Page 40 Clicking Add Holiday displays holiday addition screen like below. Figure 4-7 SYSTEM > Time/Date > Holiday > Add Holiday Table 4-8 SYSTEM > Time/Date > Holiday > Add Holiday Item and Description Name Function Name Enter the holiday name. Date Display chosen date.

  • Page 41: Account > User

    4.2.3 Account > User Set the user’s account of the system. Figure 4-8 SYSTEM > Account > User Table 4-9 SYSTEM > Account > User Item and Description Name Function Add Group Add users’ group. Add User Add users. Group List Display a total group list.
  • Page 42 Press Add Group button, then Add Group screen displays. Figure 4-9 SYSTEM > Account > User > Add Group Table 4-10 SYSTEM > Account > User > Add Group Item and Description Name Function Name Enter the group name. PERMISSION Select items to permit access.

  • Page 43: Configuration (Config)

    4.2.4 Configuration (Config) Set Export/Import and Factory Default of the system. Config > Export/Import Through a save medium, users may apply information set to other devices identically. Figure 4-11 SYSTEM > Config > Export/Import Table 4-12 SYSTEM > Config > Export/Import Item and Description Name Function Device...
  • Page 44 Config > Factory Default Default the setting value of the device. Figure 4-12 SYSTEM > Config > Factory Default Table 4-13 SYSTEM > Config > Factory Default Item and Description Name Function Select All Select/deselect all items to be defaulted. /Unselect All Default Item Select/deselect related items to be defaulted.

  • Page 45: Camera

    CAMERA In CAMERA section, set the camera to be connected with the device. 4.3.1 Basic Set the fundamental functions of camera and audio. Basic > Basic Set the basic items of camera by channels. Figure 4-13 CAMERA > Basic > Basic Table 4-14 CAMERA >...
  • Page 46 Press Copy Covert Setup button, then Copy Covert Setup screen displays. Figure 4-14 CAMERA > Basic > Basic > Copy Covert Setup Table 4-15 CAMERA > Basic > Basic > Copy Covert Setup Item and Description Name Function From Select a channel converted setting. Select a channel to be copied.
  • Page 47 Basic > Audio In/Out How to set audio of camera across channels Figure 4-15 CAMERA >Basic > Audio In/Out Table 4-16 CAMERA > Basic > Audio In/Out Item and Description Name Function Display channels of audio Select/deselect whether to use audio. Assign Displays the channels to which audio is assigned.

  • Page 48: Advanced

    4.3.2 Advanced Set camera video, stream and privacy mask. Advanced > Scan Mode Figure 4-16 CAMERA > Advanced > Scan Mode Table 4-17 CAMERA > Advanced > Scan Mode Item and Description Name Function Display channels. Scan Mode Automatically detects the camera input type or fixes the input video format to the selected type (Auto, AHD, TVI).
  • Page 49 Advanced > Analog Camera Figure 4-17 CAMERA > Advanced > Analog Camera Table 4-18 CAMERA > Advanced > Analog Camera Item and Description Name Function Display channels. Video Set brightness, contrast, and color of the camera. Privacy Mask Set the privacy field; display field numbers set in parenthesis (at most 4-setting available).
  • Page 50 Locate the mouse in the Privacy Mask field, and then click Editing Icon ( ) in the right corner, then Privacy Mask screen displays. Figure 4-18 CAMERA > Advanced > Privacy Mask Table 4-19 CAMERA > Advanced > Privacy Mask Item and Description Name Function Select channels to set privacy field.
  • Page 51 Advanced > IP Camera Figure 4-19 CAMERA > Advanced > IP Camera Table 4-20 CAMERA > Advanced > IP Camera Item and Description Name Function Camera Opens a pop-up menu for IP camera registration. Registration Display channels. Video Set brightness, contrast, and color of the camera. Stream Setup camera stream such as Resolution, Framerate, Bitrate and etc.

  • Page 52: Device

    DEVICE In DEVICE, set the device to connect with the unit. 4.4.1 Display Set matters related to a display device and live screen. Display > Display Set the display device. Figure 4-20 DEVICE > Display > Display Table 4-21 DEVICE > Display > Display Item and Description Name Function HDMI/VGA...
  • Page 53 Display > Spot Set the output of the Spot monitor. Figure 4-21 DEVICE > Display > Spot Table 4-22 DEVICE > Display > Spot Item and Description Name Function Sequence Set the channel and dwell time (5, 10, 20, 30sec) when the Auto mode of Spot Monitor is selected.
  • Page 54 Set the OSD of the display device. Figure 4-22 DEVICE > Display > OSD Table 4-23 DEVICE > Display > OSD Item and Description Name Function Camera Name Select the way to display camera in live screen (Off, CH + Title, CH). Live Bar Select the way to display the live bar (Always On, Auto Hide).
  • Page 55 Display > Sequence How to set the play sequence of live screen. Figure 4-23 DEVICE > Display > Sequence Table 4-24 DEVICE > Display > Sequence Item and Description Name Function Quad Sequence Set to convert automatically as 4-partition screen on the time basis. Division Select screen partition mode to be marked in the below table (All, Full, and Quad).
  • Page 56 Clicking Add Sequence Displays Add Sequence screen. Figure 4-24 DEVICE > Display > Sequence > Add Sequence Table 4-25 DEVICE > Display > Sequence > Add Sequence Item and Description Name Function Dwell Time Select time to play (3 sec, 5 sec, 10 sec, 15 sec, and 30 sec). Division Select the partition screen to play (Full).

  • Page 57: Disk

    4.4.2 Disk Disk > Setup The way to set the disk Figure 4-25 DEVICE > Disk > Setup Table 4-26 DEVICE > Disk > Setup Item and Description Name Function Refresh disk information. Disk Info Display the basic disk information in disc list. ▪...
  • Page 58 Name Function Overwrite Select/deselect to rewrite new data on the existing disk in case of Recording insufficient saving space remained. Auto Delete Select/deselect to use the function to delete saved data automatically (1- 365 days). Disk > iSCSI The way to set the iSCSI Figure 4-26 DEVICE >...
  • Page 59 Clicking Register displays iSCSI Register screen. Figure 4-27 DEVICE > Disk > iSCSI > Register Table 4-28 DEVICE > Disk > iSCSI > Register Item and Description Name Function Target Address Input IP address and port for iSCSI. Target Port HTTP Port Discover Click to search iSCSI storage.

  • Page 60: Ptz > Ptz

    4.4.3 PTZ > PTZ To use PTZ Function of the device, users need to match ID, protocol, and speed with each camera. Figure 4-28 DEVICE > PTZ > PTZ Table 4-29 DEVICE > PTZ > PTZ Item and Description Name Function Copy PTZ Setup Apply setting history to all or selected channels in the same way.

  • Page 61: Serial Device > Serial Device

    4.4.4 Serial Device > Serial Device Users need to set Serial Device to connect PTZ camera, USB device with the unit. Figure 4-29 DEVICE > Serial Device > Serial Device Table 4-30 DEVICE > Serial Device > Serial Device Item and Description Name Function USB (to Serial)

  • Page 62: Text > Text

    4.4.5 TEXT > TEXT Set the input device such as ATM or POS, etc. Figure 4-30 DEVICE > TEXT > TEXT Table 4-31 DEVICE > TEXT > TEXT Item and Description Name Function Select/deselect whether to use text function. Select camera channels to connect with the text input device. Protocol Select protocol to correspond with the text input device.
  • Page 63 Press Copy TEXT Setup button, then Copy TEXT Setup screen displays. Figure 4-31 DEVICE > TEXT > TEXT > Copy TEXT Setup Table 4-32 DEVICE > TEXT > TEXT > Copy TEXT Setup Item and Description Name Function From Select channels set. Select the device to be copied.

  • Page 64: Record

    RECORD In RECORD, users may set matters related to recording. 4.5.1 Schedule Schedule > Schedule Recording types can be set across channels and time. Figure 4-32 RECORD > Schedule > Schedule Table 4-33 RECORD > Schedule > Schedule Item and Description Name Function Select channels to set schedules.
  • Page 65 The function of each scheduling type involves: Table 4-34 Function of each scheduling type Color Scheduling type Function None Do not record. Continuous Record on consecutive mode when time set. Motion Record on event recording mode when motion sensitive event occurs. Alarm Record on event recording mode when alarm occurs.
  • Page 66 7 Copy Schedule Setup screen displays. 8 Select channels to be copied. 9 Select channels to apply copied content. 10 Copy the schedule by pressing Apply. 11 Press Save to save the schedule. Schedule > Quick Figure 4-33 RECORD > Schedule > Quick User Manual...
  • Page 67 Table 4-35 RECORD > Schedule > Quick Item and Description Name Function Desired Recording Period Select desired recording period. Recording Hours per Day Select recording hours per day. HDD Size It is automatically displayed. Stream Priority Select Framerate or Resolution. Recording mode Select recording mode as Continuous or Event.

  • Page 68: Main Stream

    4.5.2 Main Stream To set the image resolution when event occurs across channels or general recording is in process. Main Stream > Analog Camera To set the image quality and resolution of Main Stream Figure 4-34 RECORD > Stream > Main Stream Table 4-36 RECORD >...
  • Page 69 Clicking Copy Stream Setup opens Copy Stream Setup. Figure 4-35 RECORD > Stream > Main Stream > Copy Stream Setup Table 4-37 RECORD > Stream > Main Stream > Copy Stream Setup Item and Description Name Function From Select the channel set. Select the device to be copied.
  • Page 70 Table 4-38 RECORD > Main Stream > IP Camera Item and Description Name Function Display channels. Resolution Show camera main stream setup status. Framerate Bitrate Continuous Select recording stream in case of Continuous mode. Event Select recording stream in case of Event mode. Pre-Alarm Start recording before set time, if event occurs (null, 1 sec, 2 sec, 3 sec, 4 sec, and 5 sec).
  • Page 71 Main Stream > Codec Type To set the video compression way. Figure 4-37 RECORD > Main Stream > Codec Type Table 4-39 RECORD > Main Stream > Codec Type Item and Description Name Function Display channels. Main Stream Select the main stream codec (H.264, H.265). Sub Stream Select the sub stream codec (H.264, H.265).

  • Page 72: Second Stream

    Table 4-40 RECORD > Main Stream > Copy Codec Setup Item and Description Name Function From Select the channel to be copied. Select the channel copied the same content. Select All /Unselect All Select/deselect all channels. Copy Item Select the stream to be copied. Copy Select the list to be copied.
  • Page 73 Name Function Copy Stream Copy main recording image set value to other channels. For more Setup information about set value copy, see section “4.5.2 Stream > Main Stream in Main Stream.” User Manual...
  • Page 74 Second Stream > IP Camera Figure 4-40 RECORD > Second Stream > IP Camera Table 4-42 RECORD > Second Stream > IP Camera Item and Description Name Function Display channels. Resolution Show camera main stream setup status. Framerate Bitrate Pre-Alarm Start recording before set time, if event occurs.

  • Page 75: Panic

    4.5.4 Panic How to set immediate recording Figure 4-41 RECORD > Stream > Panic Table 4-43 RECORD > Stream > Panic Item and Description Name Function Panic Record Select/deselect to use immediate recording function. Display channels. Resolution Set the resolution of video clips (4MP, 1080P, 720P, 960H). Frame rate Select recording FPS (1-30).

  • Page 76: Event

    EVENT In EVENT, users may set each event of the device. 4.6.1 System/Disk To set the system and disk event System/Disk > System To set the system event of the device Figure 4-42 Event > System/Disk > System Table 4-44 Event > System/Disk > System Item and Description Name Function System Restart...
  • Page 77 System/Disk > Disk To set disk event Figure 4-43 Event > System/Disk > Disk Table 4-45 Event > System/Disk > Disk Item and Description Name Function Disk Unplugged Select/deselect whether to use disk unplugged event. Beep Select/deselect whether to use buzzer sound in case of event. Alarm out Select to end alarm time (null, Relay1-Keep, 5 sec, 10 sec, 20 sec, 30 sec, 1 min, 10 min, 30 min, and 1 hour).

  • Page 78: Alarm In

    4.6.2 Alarm In To set sensor alarms and schedule Alarm In > Setup To set sensor alarms Figure 4-44 Event > Alarm In > Setup Table 4-46 Event > Alarm In > Setup Item and Description Name Function Sensor Display sensor numbers. Select/deselect whether to use alarm in the sensor.
  • Page 79 Placing your mouse on Alarm, Group Rec, Noti., Preset and clicking editing Icon ( ) in right corner displays Event: Alarm screen. Figure 4-45 Event > Alarm In > Setup > Event: Alarm Table 4-47 Event > Alarm In > Setup > Event: Alarm Item and Description Name Function Alarm-out...
  • Page 80 Alarm In > Schedule To schedule recording time when alarm occurs across device sensors Figure 4-46 Event > Alarm In > Schedule Table 4-48 Event > Alarm In > Schedule Item and Description Name Function Sensor Select the sensor to set the schedule. Schedule Type Select the types of schedules.

  • Page 81: Motion

    4.6.3 Motion To set and schedule motions across channels Motion > Setup To set motions across channels. Figure 4-47 Event > Motion > Setup Table 4-49 Event > Motion > Setup Item and Description Name Function Display channels. Select/deselect whether to use motion function in the channel. Area Display the motion area.
  • Page 82 Placing your mouse on Alarm, Group Rec, Noti., Preset and clicking editing icon ( ) in right corner displays Event : Alarm Note screen. For more information about Event : Motion screen, see section “4.6.2 Alarm In > Setup in Alarm In.” Motion >...

  • Page 83: Video Loss

    4.6.4 Video Loss To set Video Loss across channels Figure 4-49 Event > Video Loss > Setup Table 4-51 Event > Video Loss > Setup Item and Description Name Function Display channels. Select/deselect whether to use Video Loss in the channel. Beep Select use time of buzzer sound (null, 5 sec, 10 sec, 20 sec, 30 sec, 1 min, 10 min, 30 min, and 1 hour).

  • Page 84: Notification

    4.6.5 Notification To set and schedule periodical alarms Notification > Periodic To set periodical alarms Figure 4-50 EVENT > Notification > Periodic Table 4-52 EVENT > Notification > Periodic Item and Description Name Function Periodic Select/deselect whether to use periodical alarms. Notification Summary Send the save or event information.
  • Page 85 Notification > Schedule To schedule remote notification (alarm & motion) Figure 4-51 EVENT > Notification > Schedule Table 4-53 EVENT > Notification > Schedule Item and Description Name Function Schedule Type Select the types of schedules. Selection Schedule Table Display the schedule users set. Drag Field Display the area dragged with a mouse.

  • Page 86: Network

    NETWORK In NETWORK, users may set the network environment. 4.7.1 Basic > WAN Port To set the network environment Figure 4-52 NETWORK > Basic > WAN Port Table 4-54 NETWORK > Basic > WAN Port Item and Description Name Function Static IP Check if you use static IP.

  • Page 87: Basic > Ip Filter

    4.7.2 Basic > IP Filter To set the IP connection restriction function. Figure 4-52 NETWORK > Basic > IP Filter Table 4-54 NETWORK > Basic > IP Filter Item and Description Name Function Mode Select None to disable. Select Access to access IP address range. Select Deny to restrict IP address range.

  • Page 88: Dvrns/Ddns

    4.7.3 DVRNS/DDNS To set DVRNS/DDNS DVRNS/DDNS > DVRNS/Dashboard To register DVRNS/Dashboard account Figure 4-53 NETWORK > DVRNS/DDNS > DVRNS/Dashboard Table 4-55 NETWORK > DVRNS/DDNS > DVRNS/Dashboard Item and Description Name Function DVRNS Register DVRNS account. ▪ ID: Enter DVRNS ID (default: MAC address of the unit) ▪...
  • Page 89 DVRNS/DDNS > DDNS To set DDNS site for remote users to access in networking Figure 4-54 NETWORK > DVRNS/DDNS > DDNS Table 4-56 NETWORK > DVRNS/DDNS > DDNS Item and Description Name Function DDNS Site Select DDNS site. Host Name Enter the host name.

  • Page 90: E-Mail

    4.7.4 E-Mail To set email server to send email on event Figure 4-55 NETWORK > E-Mail > E-Mail Table 4-56 NETWORK > E-Mail > E-Mail Item and Description Name Function Server Type Select SMTP server. ▪ gmail.com ▪ hotmail.com ▪ aol.com ▪...

  • Page 91: Ftp

    4.7.5 Set up FTP server to send video to FTP server. The file format is AVI file. Figure 4-57 NETWORK > FTP > FTP Table 4-57 NETWORK > FTP > FTP Name Function FTP Server Select whether to use FTP. Address Enter server address and port.

  • Page 92: P2P

    4.7.6 User can connect recorder from mobile app using QR code scan. Figure 4-58 NETWORK > P2P > P2P Table 4-58 NETWORK > P2P > P2P Name Function P2P Registration Click button to check up registration status. P2P QR Code Scan QR code using mobile app to connect recorder.

  • Page 93: Notification Server

    4.7.7 Notification Server Notification Server > Notification Server Figure 4-59 NETWORK > Notification Server > Notification Server Table 4-59 NETWORK > Notification Server > Notification Server Name Function Notification Server Select/deselect whether to use Notification Server. Type Select TCP or UDP Protocol. Enter the server IP address or host name.
  • Page 94 Notification Server > Notification Message Set up the message to be sent to the notification server when event occurs. Figure 4-60 NETWORK > Notification Server > Notification Message Table 4-60 NETWORK > Notification Server > Notification Message Name Function Deleted registered notification message. Notification message edit window pop-up.
  • Page 95 Figure 4-61 NETWORK > Notification Server > Notification Message > Add Message Table 4-59 NETWORK > Notification Server > Notification Message > Add Message Name Function Select the channel to add a message. Event Select the event type (motion, alarm, video loss). Message Create a message to send.

  • Page 96: Search/Playback

    Search/Playback This chapter describes Live Launcher search and play menu in the below screen bar. Figure 5-1 Live Launcher Search, Play menu Table 5-1 Item and Description of Live Launcher Search, Play menu Item Description Search recorded data (time, event, thumbnail, smart search and text). Playback recorded data.
  • Page 97 Search > Event Recording data is searched by event type. Figure 5-3 Search: Event Table 5-3 Search: Event Item and Description Item Description Select CH Select channels to search. Select All Select/deselect all channels. /Unselect All Start Setting starting time to search. Setting ending time to search.
  • Page 98 Item Description Calendar Selecting dates to search. Selecting channels to search. Time Selecting time to search. Interval Setting time interval for searching images. Time Overlap Selecting the overlapping section to play if there is a duplicate of the same time by changing the time. Time Playing or stopping videos searched.
  • Page 99 Figure 5-6 Search: TEXT Table 5-6 Search: TEXT Item and Description Item Description Select CH Select channels to search. Select All Select/deselect all channels. /Unselect All Start Setting starting time to search. Setting ending time to search. Keyword Entering keyword to search. Case Sensitive Searching items in case sensitive.

  • Page 100: Playback

    Figure 5-7 Search: VCA Table 5-7 Search: VCA Item and Description Item Description Select CH Selecting channels to search Start, End Set start time and end time. Event Type Selecting VCA event type. Search Search VCA event. Event List Displaying event list searched Thumbnail Field Displaying thumbnail images of selected event Play...
  • Page 101 Item Description Play forward step. Play fast forward (2~64x). Go to last section of the video. Moving to previous/next partition screens. Selecting the partition mode to mark in the screen. Audio output on-off (toggle). Searching the recorded data (time, event, thumbnail, smart search and text).
  • Page 102 Figure 5-10 Playback Quick menu Table 5-10 Playback Quick menu Item Description Screen Mode Select the partition mode of live screen (Full, 2X2, 3X3, and 4x4). Magnify selected live screen (2x, 4x, and 8x). Zoom in This menu is shown full screen mode only. Text Overlay POS text overlay on the screen.

  • Page 103: Webviewer

    Webviewer This chapter describes webviewer for monitoring videos through a PC in remote mode. How to monitor with webviewer. Table 6-1 System Requirement for Webviewer Item Recommended Minimum Microsoft Ⓡ Windows Ⓡ 10 x86(64bit) Microsoft Ⓡ Windows Ⓡ XP Home SP3 (Home Premium, Professional, Ultimate) Microsoft Ⓡ...
  • Page 104 In case of selecting Viewer (Internet Explorer) Click Viewer. When Java download screen opens, download and install JAVA. Live images may be monitored. In case of selecting Viewer (Chrome) User Manual...
  • Page 105 After click Viewer, .jnlp file can be downloaded. Click Keep button. Click webviewer_chrome.jnlp. When Java download screen opens, download and install JAVA. Live images may be monitored. User Manual...
  • Page 106 In case of selecting Setup Users can set the menu in similar ways with NVR connected monitor. Figure 6-1 Setup screen User Manual...
  • Page 107 Products Specifications Channel 4CH(2HDDs) 8CH(2HDDs) 16CH(4HDDs) Video Input Channel Up to 4ch (4 BNC, 1 IP Up to 8ch (8 BNC, 2 IP Up to 16ch (16 BNC, 4 IP configurable) configurable) configurable) Video Input Type AHD, TVI, CVBS, IP AHD, TVI, CVBS, IP AHD, TVI, CVBS, IP Video...
  • Page 108 Backup Backup File Format AVI, H4V AVI, H4V AVI, H4V PTZ & OSD Control RS485, UTC RS485, UTC RS485, UTC Text In POS/ATM POS/ATM POS/ATM (Network, RS485, USB) (Network, RS485, USB) (Network, RS485, USB) User Interface Mouse, Mouse, Mouse, USB/RS485 Keyboard USB/RS485 Keyboard USB/RS485 Keyboard Ethernet...

Table of Contents