Advertisement
RC Boat Battery Installation
1. Twist the cabin cover switch to left or right,
and then forced upward to lift the cabin cover.
2. Put the Li battery to the battery box of
the hull.
1
2
4. (1) Insert the cabin cover to the hull. (2) Press upper cover.(3) Twist the cabin cover switch
till pressing down the cabin cover tightly.
Note: Push the battery wire to the boat side to avoid getting stuck or cutting o by
gear.
3. Connect the battery with the power plug.
3
5
Code Pairing Between Transmitter and RC Boat
Power on the transmitter, and the power indicator light of the transmitter ashes and
issues sound of "di". Put the boat into water and the transmitter issues constantly
sound of "dididi". The power indicator light of the transmitter keeps bright, which
indicates successful code pairing and the boat is ready to be operated.
Operating Method
Forward
1. Pull back the throttle trigger of the transmitter and the boat goes forward.
Backward
2. Push forward the throttle trigger of the transmitter and the boat goes backward.
Turn Left
3. Pull back the throttle trigger of the transmitter, and twist the rudder knob towards
counterclockwise direction and the boat turns left.
Turn Right
4. Pull back the throttle trigger of the transmitter, and twist the rudder knob towards
clockwise direction and the boat turns right.
6
Advertisement
