Advertisement
Picture for RC Boat Main Structure
Cabin Cover Switch
Cabin Cover
Hull
Outlet
Display Support Holder
Backward Trim
Power Indicator Light
Left Rudder Trim
Right Rudder Trim
Power Switch
Capsize Switch
Steering
Engine Rod
Steering
Rudder
Propeller
Balance Rudder
Navigation Rudder
Forward Trim
Rudder Knob
Throttle Trigger
3
Transmitter Battery Installation
Battery installation: Open the battery cover of the transmitter. Install four 1.5V AA
batteries to battery box in accordance with the positive and
negative pole indication, and then close the battery box.
Battery Cover
Battery Charging
Connect the battery with USB wire, and then connect the USB with the computer or
the adapter. The USB light is red when charging and turns to green when fully
charged. The charging time is about 220 minutes. Please cut o the charging wire
after fully charged.
Battery Box
4
Advertisement
