Adjusting The Angle; Adjusting The Stand Height - LG 24MB65PD Owner's Manual

Adjusting the angle

1
Place the monitor mounted on the stand base
in an upright position.
2
Adjust the angle of the screen. The angle of
the screen can be adjusted up to 5° forwards
and 35° backwards for a comfortable viewing
experience.
Rear Side
y
Front Side
y

Adjusting the stand height

1
2
ASSEMBLING AND PREPARING
WARNING
To avoid injury to the fingers when adjusting
the screen, do not hold the lower part of the
monitor's frame as illustrated below.
Be careful not to touch or press the screen
area when adjusting the angle of the monitor.
Place the monitor mounted on the stand base
in an upright position.
Remove the tape attached at the bottom rear
of the stand body, then pull out the locking
pin.
Stand Body
Tape
7
Locking Pin