Maintenance And Cleaning - Atag VD16 M Series Instructions For Use Manual

MAINTENANCE AND CLEANING

Disconnect the appliance before starting with cleaning.
All surfaces should be cleaned only with a damp cloth and some soapy
water. Then dry with a soft cloth.
Do not use a steam cleaner to clean the appliance.
Using abrasive products, alcohol or solvents is not recommended;
these can damage the appliance.
The front is stainless steel or glass and is susceptible to scratching. Use
special non-abrasive cleaning products suitable for stainless steel.
The vacuum chamber can be cleaned with warm water and washing-up
liquid. Then dry with a soft cloth. Avoid to moisten the suction point!
EN 10