Table of Contents
Advertisement
CHAPTER 5: NVIDIA SLI FUNCTION
5.1
R
EQUIREMENTS
Only Windows XP supports SLI (Dual Video) function.
Two identical SLI-ready graphics cards that are NVIDIA certified.
The graphics card driver should support NVIDIA SLI technology.
The power supply unit must provide at least the minimum power required
by the system, or the system will be unstable.
5.2
P
LACING THE
There is a pre-installed SLI-NF4 selector card on the motherboard. The
default setting is Normal Mode, only supports single graphics card.
To use two graphics cards, firstly, you have to set the selector card to SLI
Mode, to support dual video cards.
Step 1: Push the retention clips outward to release SLI-NF4
selector card.
Step 2: Pull the selector card out of the slot.
N4SLI-A9
SLI-NF4 S
ELECTOR
23
C
ARD
○
2
pull out the
selector card
○
1
about 45
degree lift.
O
Advertisement
Table of Contents
