PRECAUTIONS Included Accessories Contents PRECAUTIONS IMPORTANT SAFETY INSTRUCTIONS ........3 ABOUT SOUNDBAR Soundbar ................... 7 (NC303UH) ( AAA x 2 ) Top / Front panels of Soundbar ..........7 • • Remote Control Back Connectors on Soundbar ..........7 Quick Start Guide •...
Register Online at www.magnavox.com/support/ today to get the most benefits from your purchase. Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits such as Software Upgrades and important product notifications. Register Online at www.magnavox.com/support/ The Model and Serial Numbers of this Unit may be found on the cabinet Model No.:...
Page 4
Disconnect the AC Power cord to shut Off the Unit when Trouble is found or not in Use. The AC Power cord shall remain readily operable and available. CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada’s applicable licence-exempt RSSs. Operation is subject to the following two ●...
Page 5
For product recycling information, please visit - ● Depending on the environment, the temperature of this unit ● www.magnavox.com/support/ may increase slightly. This is not a malfunction. Be sure to Unplug the AC Power cord from the AC outlet ●...
Page 6
Do not spray insecticide liquid near the unit. Such chemicals may discolor the surface or damage the unit. MAGNAVOX and SMART. VERY SMART are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.
ABOUT SOUNDBAR Soundbar Top / Front panels of Soundbar INPUT LINE OPTICAL/ PAIR COAXIAL INPUT source LED color Description LINE INPUT Lights up when you switch to Line-In source (3.5mm jack). orange Lights up when you switch to USB Input source. Blinks when recognition of USB Memory Stick is in process, pausing USB INPUT orange...
Subwoofer Rear of Subwoofer Items Description Lights up when the Subwoofer is connected correctly. Blinks if the Soundbar is Off or in Standby mode, or the Subwoofer cannot be A LED indicator connected to the Soundbar. Usually the Subwoofer is connected to the Soundbar automatically when the Unit is turned On.
Remote Control Installing the Batteries for the Remote Control Install 2 AAA (1.5V) batteries matching the polarity indicated inside battery compartment of the Remote Control. The maximum operable ranges from the Unit are as follows. ● Line of sight: approx. 23 feet (7m) –...
CONNECTIONS Included Cables used in this Connection are as follows: Digital Audio Optical Cable × 1 ● Line-In cable × 1 ● Connect to a device Connect to TV Rear of Soundbar Rear of TV COAX LINE Line-In cable OPTICAL Good Good Good...
Page 11
Connect AC Power cords from Soundbar and Wireless Subwoofer to an electric outlet. Rear of Soundbar Rear of Subwoofer – 11 –...
USING YOUR SOUNDBAR Turning On the Soundbar Press on the Remote Control. Check that the LED indicator on the rear of the Subwoofer steadily lights up. The LED lights up if the Subwoofer is properly connected to the Soundbar. ● Rear of Subwoofer CONNECT button If the Soundbar is not Connecting to the Subwoofer:...
Adjust the Volume To increase or decrease the Volume, press VOL +/- on the Remote Control. Volume levels LED lighting patterns LED behavior 0 - 5 LINE LINE OPTICAL/ PAIR COAXIAL (6 levels) 6 - 11 LINE LINE OPTICAL/ OPTICAL PAIR COAXIAL COAXIAL...
Experiencing the Surround Sound Press on the Remote Control to activate the Surround sound. The LEDs blink in a spread manner, from the center (OPTICAL/COAXIAL) to both sides. ● Surround status LED lighting patterns Sound effects LINE OPTICAL/ OPTICAL/ PAIR COAXIAL COAXIAL LINE...
Choosing Preset Sound Press either , or on the Remote Control to select the desired preset sound suitable for the Audio that is playing. The LED in the center (OPTICAL/COAXIAL) blinks yellow once. When the preset sound setting is set, LED indicators go back to the current Input. NOTE(S) Select any Preset Sound according to your preference, regardless of categories.
MAKING MORE USE WITH YOUR SOUNDBAR Using a Bluetooth compatible Device Pairing a Bluetooth compatible Device with this Unit BLUETOOTH on the Remote Control to switch the Soundbar to Bluetooth Press Mode. Turn your Bluetooth compatible Device On and activate the Bluetooth setting. (See the User Manual of the Bluetooth compatible Device on how to enable Bluetooth.) On your Bluetooth compatible Device search for and select “MAGNAVOX_Soundbar”...
Page 17
The following chart describes behavior of the A PAIR indicator and To-Do’s for playback, according to each behavior sequence of the A PAIR indicator. The current status of Bluetooth and the procedures to complete A PAIR indicator behavior Bluetooth connection for Bluetooth playback. (The arrow indicates the passage of time.) Waiting for a new Bluetooth compatible Device to connect (Status: Blinks twice N...
Playing back a music file through USB Memory Stick You can enjoy playback of music files which are stored on a USB Memory Stick on this Unit. Preparing for USB Memory Stick playback You require the following equipment: A FAT(FAT16)/FAT32 formatted USB Memory Stick –...
20 seconds, then plug it back in and turn the Soundbar On. Upgrading the Software MAGNAVOX continuously tries to improve its products and we strongly recommend that you Upgrade the Soundbar Software when Upgrades are available. New Software can be downloaded from our website at www.magnavox.com/support/ using the Model Number from your Soundbar to find information.
Auto Standby Function This Soundbar will automatically go into Standby mode for Energy Saving if no Audio Signal has been ● input for more than 20 minutes. ● In order to use the Soundbar again while it is in Standby mode, press on the Remote Control.
INFORMATION Troubleshooting Guide If the Unit does not perform properly when operated as instructed in this Owner’s Manual, refer to the following. Problem Corrective action – Check if the AC Power cords are properly connected. – Unplug AC Power cords from Soundbar and Subwoofer, wait for 20 seconds. Then Plug in the No Power (no LED lights will be seen) Subwoofer followed by the Soundbar, immediately turn the Soundbar On using the Remote Control.
Specifications Power requirements Power requirements Output power 80W (Front L/R speaker: 40W, Subwoofer: 40W) Dimensions Soundbar: 39.3 x 3.1 x 3.1 inches (999 x 77 x 77 mm) (width x height x depth) Subwoofer: 8.5 x 10.1 x 11.9 inches (217 x 257 x 303 mm) Soundbar: 5.29 lbs.
Limited Warranty LIMITED WARRANTY NINETY (90) DAY LABOR / ONE (1) YEAR PARTS WARRANTY COVERAGE: This warranty does not apply (a) to damage caused by This warranty obligation is limited to the terms as set forth accident, abuse, misuse, neglect, misapplication, or non- below.
Español Conexiones Reproducción Para conectar a una TV, consulte “CONNECTIONS Presione para encender su (CONEXIONES)” en la página 9 y verifique las terminales de la TV, después conecte su Soundbar a la TV, y conecte el cable Soundbar. de energía CA. Para reproducir audio a través de un dispositivo Presione el botón de fuente INPUT Bluetooth, consulte “Playing back a music file through (Entrada) y confirme que se enciendan...
GARANTÍA LIMITADA NOVENTA (90) DÍAS EN MANO DE OBRA / UNA (1) AÑO EN PARTES COBERTURA DE GARANTÍA: Esta garantía no aplica (a) a daños causados por accidente, La obligación de ésta garantía se limita a los términos abuso, mal uso, negligencia, mala aplicación o por productos establecidos a continuación.
Need help?
Do you have a question about the MSB4620 and is the answer not in the manual?
Questions and answers
If you lose the remote is there a way to turn on the soundbar manually?