Download Print this page

Sealey PTB141507 Quick Start Manual page 2

7 drawer 1415mm heavy-duty topchest, 11 drawer 1430mm heavy-duty rollcab

Advertisement

4.3.3.
Place the connectors into the rectangular holes on the back of the top chest (fig.3.).
4.3.4.
Fasten the connectors with the screws provided.
5. OPERATION
5.1.
LIFT LATCH DRAWERS
5.1.1.
To open: lift the drawer front whilst pulling it out (fig.4).
5.1.2.
To close: shut the drawer firmly until the latch engages.
5.1.3.
If the drawer does not latch, the hook (fig.4) may be misaligned or binding. Bend the hook gently until it is parallel to the drawer edge
and engages when closed.
5.2.
TO REMOVE DRAWERS
5.2.1.
Pull drawer out almost fully.
5.2.2.
Locate the black locking levers (figs. 5 & 6).
5.2.3.
Facing the drawer; lift one lever up (fig.5), and push the other lever down (fig.6).
5.2.4.
With both levers held in this position, the drawer can be pulled out from the slides.
5.3.
TO REPLACE DRAWERS
5.3.1.
Extend the drawer runners from the cabinet.
5.3.2.
Engage the slides on either side of the drawer carefully into the runners.
5.3.3.
Push the drawer closed squarely until the drawer is closed fully, engaging the locking levers as it goes.
fig.1
6. MAINTENANCE
6.1.
Lubricate the drawer slides sparingly every six months.
6.2.
Clean the metalwork periodically with warm water and a mild detergent.
6.3.
Car wax may be used to restore the shine to the paintwork.
6.4.
Stubborn grease and oil marks can be removed by using a non-abrasive cleaner.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.2
fig.4
fig.5
01284 703534
sales@sealey.co.uk
Original Language Version
fig.3
fig.6
www.sealey.co.uk
PTB141507, PTB143011 Issue:2 (2) 12/05/21

Advertisement

loading

This manual is also suitable for:

Ptb143011