Table of Contents
Advertisement
4 Install the M2D17 adapter card:
a Remove the screw that secures the adapter slot's cover.
b Remove the adapter slot's cover.
c Align the card's connectors with the adapter slot, and insert the card into the slot.
d Put back and fasten the screw that you removed in step 4-a so as to secure the newly inserted card.
5 Put back the upper case removed in step 2 and tighten the srcews.
1
For more information about supported 10GbE or Gigabit network interface cards, please visit www.synology.com.
13 Chapter 2: Hardware Setup
Advertisement
Table of Contents
