DeWalt XR LI-ION DCMW564P2 Original Instructions Manual page 46

EnGLIsH
Problem Possible solution
Mower is abnormally Release bail handle to turn mower off. Uninstall
noisy and vibrates power source. Turn mower on side and check
blade to ensure it has not been bent or damaged.
If blade is damaged, replace with a DeWALT
replacement blade. If the underside of the deck is
damaged, return mower to a DeWALT Authorised
service centre.
If there is no visible damage to the blade and the
mower still vibrates:
• Release bail handle to turn mower off.
• Unplug mower.
• Disassemble entire blade assembly as described
in the Removing and installing blade section.
• Remove any debris and clean each piece.
• Replace each piece as described in the
Removing and installing blade section.
If mower still vibrates, return the mower to an
authorised DeWALT service centre.
Battery charger LEDs Check plug connection.
not on
Replace charger.
Mower not picking up Chute clogged. Release bail handle to turn
clippings with bag mower off. Uninstall power source. Clear chute of
grass clippings.
Raise cutting height of wheels to shorten length
of the cut.
Bag full. Empty bag more often.
44