Table of Contents
Advertisement
The AUDIO menu
SPEAKER SETUP
Select the desired sound with this view (STEREO, LEFT, RIGHT)
SPDIF SETUP
Set the digital audio signal.
• Select SPDIF OFF to switch off the digital audio signal output.
• Select SPDIF RAW to set the digital audio signal output to its raw
format (DTS/Dolby Digital 5.1).
• Select SPDIF PCM to set the digital audio signal output to PCM format.
The DOLBY DIGITAL menu
Dolby digital audio setup
DUAL MONO
In the DUAL MONO area, you can choose:
• STEREO: for stereo effect.
• L-Mono: left channel only.
• R-Mono: right channel only.
• Mix-Mono: the average of both the left and right channel.
DYNAMIC
• Select the value for the dynamic range compression to avoid losing
sound details resulting from a low volume.
The VIDEO menu
Video setup page
COMPONENT
• Cvbs: Select this format when the Composite video output is used.
• YUV: Set the video output in analog component video format.
RESOLUTION
• Select the desired resolution.
QUALITY
Set the video quality.
• SHARPNESS: Adjust the screen sharpness.
• BRIGHTNESS: Adjust the screen brightness.
• CONTRAST: Adjust the contrast of the image.
• GAMMA: Adjust the colour intensity.
• HUE: Adjust the colour intensity.
• SATURATION: Adjust the saturation of the image.
15
Advertisement
Table of Contents
