How To Choose The Right Refresh Rate - BenQ FP71E User Manual

6

How to choose the right Refresh Rate

You don't have to choose the highest possible refresh rate on an LCD display, because it is not
technically possible for an LCD display to flicker. The best results are obtained by using the factory
modes already set in your computer. There is a table with the factory modes in this user's guide.
You can choose 60 Hertz, (but not 72Hz) for the native resolution of 1280x1024. In Windows
98/2000/ME/XP you can change the refresh rate as follows:
1. Double click the "Display" icon in the Control Panel.
18 How to choose the right Refresh Rate