Page 1
This eliminates the need to clean intricate calrod, wire and reflector assemblies. A precision microprocessor-type digital display and digital "set point" temperature controller maintain consistent product temperatures. This unit also has lower heat that is controlled by microprocessor temperature controls. 130590 RV121197 Copyright @ 1997 Marshall Air Systems, Inc. All Rights Reserved.
Clean unit and base with a damp cloth or non-abrasive cleaner. DO NOT IMMERSE UNIT IN WATER! DO NOT USE CAUSTIC CLEANING SOLUTIONS! Allow sufficient drying time before attempting to use. 130590 RV081397 Copyright @ 1997 Marshall Air Systems. Inc. All Rights Reserved.
Applying new sealant is not required; however, be sure to utilize existing sealant when mounting new sensor. 130590 RV081397 Copyright (a) 1997 Marshall Air Systems, Inc. All Rights Reserved.
Page 4
HEATED HOLDING CABINET LIMITED WARRANTY MARSHALL AIR SYSTEMS, INC., ("Marshall") warrants to the first purchaser ("Purchaser") all new equipment of its manufacture to be free of defects in material and factory workmanship for a period of one year from date of shipment provided that (i) the equipment is installed in the...
Page 5
Service Agency within the service time allowance guidelines and must be submitted along with failed parts (if applicable) to Marshall Air Systems (freight prepaid) within 30 days of the work being performed. Travel is covered, but must not exceed 50 miles or 1 hour, whichever is greater. Call Marshall's Service Department at 800-722-3474 or 704-525-6230 with any questions.
Need help?
Do you have a question about the CB1 and is the answer not in the manual?
Questions and answers