Table of Contents
Advertisement
Installer setup
Press and hold both
SET INSTALLER OK?
Press OK to begin
CLOCK MODE
1 :
Function
number
+
-
Press
or
24 HOUR
1 :
Function
number
12
Setting
to change setting
24
Setting
Installer settings allow you to customise how your system
works. Check the table on page 22 to see if any settings need
to be changed.
To change installer settings:
1 Set slider to RUN.
2 Press and hold the OK and - buttons together until the
screen displays "Set Installer OK?" Press OK to enter
installer setup mode and continue.
3 Press OK repeatedly to scroll through functions until you
find one you want to change.
4 Press the + or - buttons to change any setting, then press
OK to save the new setting and advance to the next
function.
To exit installer setup at any time, move the slider switch
up, then back down to the RUN position.
21
Advertisement
Table of Contents
