BTC Btop10 series Quick Start Manual

1. Hardware description

1.1 LED

There are three LEDs to show different status:
1. Battery LED:
- RED color
- ORANGE color indicate battery is charging
- GREEN color
2. GPS LED(green):
- ACTIVE
- BLINKING per second indicate position have been fixed
3. Blue tooth LED(blue):
- FAST BLINKING
NOTE:
- SLOW BLINKING
- ACTIVE
Quick Start GUIDE
Btop10 series Wireless bluetooth GPS Receiver
indicate battery low
indicate battery is full or still have enough power.
indicate GPS power on
indicate this Blue tooth GPS is at Linking state
waiting for being discovered and linked by other blue tooth enabled
device like PDA
1. Every time user wish to connect BTC bluetooth GPS with any new MASTER
bluetooth device, which never link mutually before, user have to push linking
Switch first (bluetooth LED will blink quickly), then enable master bluetooth
device "search bluetooth device" function, master bluetooth device will take
few seconds to find GPS and ask for keying pass key.
After enter valid PASS KEY, connection will be setup (please refer to
Blue tooth PDA or other master blue tooth device for details)
2. PASS KEY (or PIN CODE) for BTC GPS is "0000"
indicate GPS is waiting for connection from other master
bluetooth device
indicate blue tooth connection have been established successfully
: Indicate GPS status
: Indicate battery status
: wireless blue tooth
Indicate
status