Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for NPI EPMS-07
Summary of Contents for NPI EPMS-07
- Page 1 OPERATING INSTRUCTIONS AND SYSTEM DESCRIPTION FOR THE EPMS-07 EPMS-E-07 EPMS-H-07 EPMS-03 MODULAR SYSTEMS VERSION 1.8 npi 2016 npi electronic GmbH, Bauhofring 16, D-71732 Tamm, Germany Phone +49 (0)7141-9730230; Fax: +49 (0)7141-9730240 support@npielectronic.com; http://www.npielectronic.com...
- Page 2 (e.g. for diagnosis or treatment of humans), or for any other life-supporting system. npi electronic disclaims any warranties for such purpose. Equipment supplied by npi electronic must be operated only by selected, trained and adequately instructed personnel.
- Page 3 (see Figure 2, right). 2.3. EPMS-H-07 Housing In addition to the standard power supply of the EPMS-07, the EPMS-H-07 has a built-in high voltage power supply. This is necessary for all MVCS / MVCC modules, the HVA-100, HV- TR150 and HVC-03M modules.
- Page 4 Note: The chassis of the PWR-03D is connected to protective earth, and it provides protective earth to the EPMS-E housing if connected. Figure 3: Left: PWR-03D front panel view Right: PWR-03D rear panel view. Note: This power supply is intended to be used with npi EPMS-E systems only. ___________________________________________________________________________ version 1.8 page 4...
- Page 5 The internal ground is used on the BNC connectors or GROUND plugs of the modules that are inserted into the EPMS-07 housing. The internal ground and mains ground (= protective earth) can be connected by a wire using the ground plugs on the rear panel of the instrument.
Need help?
Do you have a question about the EPMS-07 and is the answer not in the manual?
Questions and answers