Table of Contents
Advertisement
9.
PIP/PBP: The options for PIP/PBP Mode are Off, PIP Large, PIP Small, and
PBP. You can also adjust the PIP Position, PBP Size, Sub Source, Source
Swap, and Audio Source.
10. DDC/CI: Allows the monitor settings to be set through the software on
the PC.
Note: DDC/CI, short for Display Data Channel/Command Interface,
which allows monitor controls to be sent via software.
11. HDMI Black Level: You can select the level of blackness under HDMI
source. The options are Normal and Low.
12. Quick Start Mode: Enable monitor rapidly.
13. Power-off USB charge (Optional): Turn On or Off.
Product information
1.
From any function page, press the
2.
Reset All Settings: Reset all settings to the factory defaults.
key to open the OSD.
EN-21
Advertisement
Table of Contents
