Others - LG IPS235P Owner's Manual

18
CUSTOMIZING SETTINGS

OTHERS

1
Press any button on the bottom of the Monitor set to display the
MONITOR SETUP OSD menu.
2
Press the MENU button to display the options in the OSD menu.
3
Select OTHERS by pressing the buttons on the bottom of the
Monitor set and set the options.
4
Select EXIT to leave the OSD menu.
To return to the upper menu or set other menu items, use the up
arrow ( ) button.
The available picture settings are described below.
Menu
LANGUAGE To choose the language in which the control names are displayed.
POWER Use this function to set the power indicator on the bottom side of the monitor to ON or OFF.If you
INDICATOR set OFF, it will go off.
If you set ON at any time, the power indicator will automatically be turned on.
WHITE If the output of the video card is different the required specifications,the color level may deteriorate
BALANCE due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard
output level of the video card in order to provide the optimal image.Activate this function when
white and black colors are present in the screen.
ORIGINAL RATIO WIDE
Switch to full screen mode according to input image signal.
ORIGINAL
Change the input image signal ratio to original.
* This function works only if input resolution is lower than Monitor set ratio (16:9).
SUPER ENERGY Sets the SUPER ENERGY SAVING function.
SAVING
ON
OFF
RESET
RTC If you enable RTC function, you can control Response Time Compensation level.
(Response
If you set OFF,you disenable the Response Time Compensation function.
Time Compensation)
FACTORY Restore all factory default settings except"LANGUAGE." Press the ◄, ► buttons to reset
RESET immediately.
NOTE
TOTAL POWER REDUCTION: How much power is saved while using the monitor.
y y
TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.
y y
SAVING DATA(W/h)
y y
SUPER SAVING
LED SAVING
Saving Data depends on the Panel. So,those values should be different from each panel and panel
y y
vendor.
LG calculated these values by using "broadcast video signal".
y y
LED Saving refers to how much power can be saved using a WLED Panel instead of CCFL panel.
y y
SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING
y y
function.
Enables SUPER ENERGY SAVING you can save energy with this energy- efficient function
Disables SUPER ENERGY SAVING.
Resets the values of total energy consumption reduction and CO2 emission reduction
estimates.
545 mm (21.5 inch) 584 mm (23 inch)
4 W/h 5 W/h
15 W/h 12 W/h
Description