Advertisement
Software update process
The scaler supports software updates via USB flash disk. The procedure is
as follows:
1) Copy the file "MERGE.bin" to the root directory of a USB flash disk. (Make
sure the file is copied to the root directory. The "MERGE.bin" file is provided/
authorized by our engineering department or from our website)
2) Plug the USB flash disk to the scaler USB port on its rear panel.
3) Press the ENTER KEY (hold the KEY about 5 seconds) to start the
update .when the OSD display the update process then release the KEY.
Update completed, the scaler will reboot.
7/7
Advertisement
