Akai MPC 1000 Operator's Manual page 38

28
Chapter 4: Editing sequences
Changing the timing of an event (SHIFT TIMING)
You can shift the timing of the note event.
01. Select the Edit field in the EVENT page of the SEQ
EDIT mode, and select SHIFT TIMING.
The various fields necessary for the Shit Timing will
be displayed.
02. In the time field and the Notes field, select the region
that you wish to edit.
03. In the Edit sq field and the Tr field on right, select the
sequence and track that you wish to edit.
In the Edit sq field and the Tr field, you can select
ALL by turning the DATA wheel. When you select
ALL, the MPC1000 will shift the timing of all the
sequence and tracks. .
04. In the Amount field, set the amount of Shift timing.
You can set by tick.
05. Select the direction of Shift Timing.
EARIER: Shits forwards
Shifts back
LATAR:
06. Press the F6 (DO IT) key
The MPC1000 will start processing your changes.
Changing the Velocity of an event (Velocity)
You can change the velocity of any note event.
01. Select the Edit field in the EVENT page of the SEQ
EDIT mode, and select Velocity.
The various fields necessary for changing the ve-
locity will be displayed.
02. In the time field and the Notes field, select the region
that you wish to edit.
03. In the Edit sq field and the Tr field on right, select the
sequence and track that you wish to edit.
In the Edit sq field and the Tr field, you can select
ALL by turning the DATA wheel. When you select
ALL, the MPC1000 will change the velocity of the
sequence and all its tracks.
MPC1000 v2 Operator's Manual rev 1.0
04. In the MODE field, choose the method of velocity change.
ADD VALUE: Adds the value selected in the
Value: field to the note.
SUB VALUE: Subtracts the value selected in the
Value: field from the note.
MULTI VAL%: Multiplies the Velocity (percent) by
the value selected in the Value:
field.
SET TO VALUE: Sets the note to the Velocity selected
in the Value: field..
05.In the Value field, set the value to be adjusted.
You can set the Value between 0 and 127. When
you select "MULTI VAL%" in the Mode field, you
can set the Value between 0 and 200.
06. Press the F6 (DO IT) key
The MPC1000 will start processing your changes.
Changing the duration of an event (DURATION)
You can change the Duration of any note event.
01. Select the Edit field in the EVENT page of the SEQ
EDIT mode, and select DURATION.
The various fields necessary for changing the du-
ration will be displayed.
02. In the time field and the Notes field, select the re-
gion that you wish to edit.
03. In the Edit sq field and the Tr field on right, select the
sequence and track that you wish to edit.
In the Edit sq field and the Tr field, you can select
ALL by turning the DATA wheel. When you select
ALL, the MPC1000 will change the Duration of the
sequence and all its track.
04. In the MODE field, select how you want to change
the Duration.
Adds the value selected in the
ADD VALUE :
Value: field to the note.
SUB VALUE : Subtracts the value selected in
the Value: field from the note.
MULTI VAL% : Multiplies the Velocity (per-
cent) by the value selected in
the Value: field.
SET TO VALUE : Sets the note to the Velocity se-
lected in the Value: field..