Table of Contents
Advertisement
3. Select "[AV] Samsung Soundbar A400-Series" from the list on TV's screen.
An available Soundbar is indicated with "Need Pairing" or "Paired" on the TV's Bluetooth device
list. To connect the TV to the Soundbar, select the message, and then establish a connection.
• When the TV is connected ,the blue LED should always go on.
4. You can now hear TV sound from the Soundbar.
If the device fails to connect
• If a previously connected Soundbar listing (e.g. "[AV] Samsung Soundbar A400-Series") appears in
the list, delete it.
• Then repeat steps 1 through 3.
NOTE
• After you have connected the Soundbar to your TV the first time, use the "Bluetooth Ready" mode
to reconnect.
Disconnecting the Soundbar from the TV
Press the
(Source) button at the right side of the Soundbar or the
remote control, and then change to any mode except "Bluetooth".
• Disconnecting takes time because the TV must receive a response from the Soundbar.
(The time required may differ, depending on the TV model.)
• To cancel the automatic Bluetooth connection between the Soundbar and TV, press and hold
button for 5 seconds in "Bluetooth Ready" mode. TV Connect is turned OFF.
• To turn TV Connect back on, press and hold the
"Bluetooth Ready" mode.
• TV Connect is set to ON by default.
Mode
TV Connect-OFF
TV Connect-ON
Remote control Button
5 Sec
5 Sec
ENG - 18
,
button for 5 seconds with the Soundbar in
Blinking
B
Blinking
B
or
button on the
LED indicator
W
W
R
W
W
G
Hide quick links:
Advertisement
Table of Contents
