Wolf ICBEC24-B Use And Care Manual page 10

COFFEE SYSTEM OPERATION
Latte Macchiato, Caffelatte or Frothed Milk
Remove water spout (if installed).
1
Adjust the froth regulator on the milk container to the
2
desired amount. Refer to the chart and illustration below.
Fill with milk and insert the milk container. Refer to the
3
illustration below.
Place a cup under the coffee spout, then verify the milk
4
spout is positioned over the cup.
Press , press or to scroll to desired beverage,
5
then press to initiate the cycle.
Once the cycle is complete, place a cup under the milk
6
spout, then press and hold CLEAN on the milk container
until the bar is complete.
Remove milk container and place in refrigerator.
7
FROTH
Caffelatte No Froth
Latte Macchiato Some Froth
Cappuccino Most Froth
RECEPTACLE
FROTH
CLEAN
REGULATOR
BUTTON
Froth regulator. Milk container.
|
10 English
ADJUSTING VOLUME
Refer to the chart below for the programmed volume of milk
and coffee for each beverage. The maximum volume of milk
is limited to the volume in the container.
Insert the milk container.
1
Press , then press or to scroll to desired bev-
2
erage. Press and hold until 'MILK FOR MACCHIATO
PROGRAM QUANTITY', 'MILK FOR CAFFELATTE
PROGRAM QUANTITY' or 'FROTHED MILK PROGRAM
QUANTITY' is displayed, then release.
Once the desired volume of milk is dispensed, press
3
For a Latte Macchiato or Caffelatte, the unit will begin
4
to dispense coffee and 'COFFEE FOR MACCHIATO
PROGRAM QUANTITY' or 'COFFEE FOR CAFFELATTE
PROGRAM QUANTITY' appears on the display.
Once the desired volume of coffee is dispensed,
5
press . The new volume will be maintained until reset.
VOLUME
MILK
Latte Macchiato 90 ml
Caffelatte 240 ml
Frothed Milk 240 ml
Hot Water
Hot water can be dispensed to make tea or for preheating
cups. Preheating cups will allow beverages to stay hot
longer.
Verify the water spout is installed, then place a cup
1
under the spout. Refer to the illustration below.
Press . 'HOT WATER' will appear on the display.
2
Once the desired volume has been dispensed, press
3
ADJUSTING VOLUME
Verify the water spout is installed, then place a cup
1
.
under the spout.
Press until 'HOT WATER PROGRAM QUANTITY' is
2
displayed, then release.
Once the desired volume has been dispensed, press
3
The new volume will be maintained until reset.
COFFEE
RECEPTACLE
60 ml
60 ml
NA
Water spout.
Coffee Mill
GRIND ADJUSTMENT
If coffee delivery is too fast or too slow, the grind can be
adjusted by turning the grind adjustment dial. Refer to the
illustrations below.
Adjustment must be made while the mill is in operation. Turn
the dial clockwise for faster coffee delivery (coarser grind)
and counterclockwise for slower coffee delivery (finer grind).
.
ADJUSTMENT DIAL
FINER GRIND
.
COARSER GRIND
Adjustment dial location. Grind adjustment.