Table of Contents
Advertisement
3.
Click "Apply" button. The result will look like the below figure.
Describe "DLS Status" as follow:
1. As the up figure, after configuring DLS successfully, show MAC address of the opposite
side and Timeout Value of setting in "DLS Status". In "DLS Status" of the opposite side,
it shows MAC address of myself and Timeout Value of setting.
2. Display the values of "DLS Status" to "Direct Link Setup" as follow:
Step1:
In "DLS Status", select a direct link STA what you want to show it's values in "Direct
Link Setup".
38
Advertisement
Table of Contents
