Table of Contents
Advertisement
USING THE CITRIX
CLOUD MONITOR SET
Connecting LAN/Peripherals
LAN connection
Connect the router or switch to the monitor using a
LAN cable as illustrated below.
Hub/Router
NOTE
The LAN cable is sold separately.
y
The following LAN cable type can be used:
y
Standard: IEEE 802.3 ETHERNET
Connect the LAN cable and the peripheral de-
y
vices to use the CITRIX cloud monitor.
1
LAN
USING THE MONITOR SET
DVI connection
To use dual monitors, connect the cloud monitor to
an extended monitor using a DVI cable as illus-
trated below.
1
1
1
DVI-D IN
MONITOR
CAUTION
Connect the input signal
y
cable and tighten in the
direction of the arrow. To
prevent disconnection
secure the cable tightly.
Do not press on the screen for a prolonged
y
time. This may cause image distortion.
Do not display a still image on the screen
y
for a prolonged time. This may cause image
retention. If possible, use the screen saver.
NOTE
When connecting the power cord to the out-
y
let, use a grounded (3-hole) multi-socket or a
grounded wall outlet.
The monitor may flicker when turned on in an
y
area of low temperature. This is normal.
Sometimes red, green or blue spots may ap-
y
pear on the screen. This is normal.
13
Advertisement
Table of Contents
