Connecting Remote Control; Single Display Control; Ir Pass Through Control - Asus ST555 User Manual

3.4.

Connecting Remote Control

3.4.1. Single Display Control

To control one display, connect the "IR Sensor Cable" to the [IR IN] port.
Point the top of the remote control toward the "IR Sensor Cable" when pressing a button.
NOTE: The Display's remote control sensor will stop working after connected with the "IR Sensor Cable".
IR Sensor Cable
IR IN IR OUT
POWER
VIDEO AUDIO
SMART SOURCE SOURCE
PIP
ON/OFF INPUT CHANGE
CONTRAST BRIGHTNESS
DISPLAY MENU
SET
AUTO EXIT
ADJUST
VOL UP
MUTE
VOL DOWN

3.4.2. IR Pass Through Control

To control a Video-Wall set up by multiple displays, use the"IR Sensor Cable" and the"IR Cable" to achieve the function.
IR Cable
IR Sensor Cable
IR IN IR OUT
Display
Remote control of DVD player
1. Connect the "IR Sensor Cable" to the [IR IN] port of the display.
2. Connect with the"IR Cable" from the [IR OUT] port of the display to the IR input port of the DVD player.
3. IR signal will be passed to DVD player when pressing a button.
NOTE: The remote control may not function properly if the "IR Sensor Cable" is under direct sunlight or strong illumination, or when there is obstacle
in the path of signal transmission.
IR input port of the DVD player
DVD Player
13
ST555