Table of Contents
Advertisement
You must first survey the installation site and determine the illumination distance.
Use a coin or flat blade screwdriver to open the waterproof cover at the back of the illuminator.
35-Kg-cm
Use the 4mm side of the allen wrench to turn the beam angle to an estimated illumination distance, e.g.,
200 meters. See the tables on the next page for how to do it.
Angle narrower
Longer distance
Angle wider
Shorter distance
Tips:
You may forget your current beam angle
configuration. In this case, turn many full circles
clockwise until the rotation resistance is felt (returns
to the widest angle, reaches its mechanical stops),
and then turn the selector counter-clockwise
according to the angle listed on the tables. Each full
circle corresponds to a preset beam angle.
Beam angle
selector
7
Advertisement
Table of Contents
