Table of Contents
Advertisement
Euro Scart connection
(Depending on model)
Transmits the video and audio signals from an external device to the
TV set. Connect the external device and the TV set with the euro scart
cable.
Output
Type
Current
input mode
Digital TV
Analogue TV, AV
Component
HDMI
1 TV Out : Outputs Analogue TV or Digital TV signals.
• Any Euro scart cable used must be signal shielded.
• When watching digital TV in 3D imaging mode, only 2D out signals
can be output through the SCART cable. (Only 3D models)
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
NOTE
• Supported HDMI Audio format :
Dolby Digital (32 kHz, 44.1 kHz, 48 kHz),
DTS (44.1 kHz, 48 kHz),
PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz)
(Depending on model)
Network connection
(Only LAN PORT model)
Image shown may differ from your TV.
Wired network connection
14
AV1
(TV Out
)
1
Digital TV
Analogue TV
Internet connection
Wired router
Network setting
1 Press the SETTINGS button to access the main menu.
2 Select the NETWORK
Network Setting menu.
NETWORK
Move
Network Setting
Network Status
3 Select the Start Connection.
Network Setting
Connect a LAN cable to the back of TV.
Setting your network will enable network-related features on the TV.
Start Connection
Previous
4 The device automatically tries to connect to the network.
Network Setting
Network connecting...
Cancel
Previous
5 The connected network is displayed.
Select the Complete to confirm the network connection.
Network Setting
Wired network is connected.
For detailed settings, select [Set Expert].
Set Expert
Complete
Previous
OK
Next
Advertisement
Table of Contents
