ABB HT612026 Operation Manual page 126

Operation Manual / A170-M.. - A175-M..
10 Taking a turbocharger out of operation / 10.3 Fitting the cover plate
Fig. 76: Fitting the cover plate
1. Remove the cartridge group (see chapter Disassembly and assembly / Removing the
cartridge group).
2. Close the opening in the gas outlet casing with the cover plate (01).
3. Attach cover plate with spacer sleeves (02) and nuts (61037).
Close the lubricating oil supply to the turbocharger.
u
10.3.1 Further measures and information for the operation of
4-stroke engines with a cover plate of the turbocharger
4-stroke engine with a turbocharger
No further measures are necessary. The engine can be operated as a suction engine accord-
ing to the instructions of the enginebuilder.
4-stroke engine with several turbochargers
Separate receivers
In engines with separate air and exhaust gas receivers, no further measures are necessary.
The engine can be operated as a suction engine according to the instructions of the en-
ginebuilder.
© Copyright 2022 ABB. All rights reserved. HZTL4033_EN Rev.K January 2022