12
ASSEMBLING AND PREPARING
Adjusting the stand height
29EB93
1
Place the monitor mounted on the stand base
in an upright position.
2
Remove the tape attached at the bottom rear
of the stand body, then pull out the locking
pin.
Stand Body
3
Push the Head downward and pull out the
Locking Pin.
Head
Tape
Locking Pin
Locking pin
4
The height can be adjusted up to 110.0 mm.
CAUTION
Once the pin is removed, it is not neces-
y
sary to re-insert it to adjust the height.
WARNING
Do not put your fingers or
y
hand between the screen
and the base (chas-
sis) when adjusting the
screen's height.
110.0 mm