Osd Design Select - Hitachi 42HDT79/DW2-U Service Manual

10 OSD Design Select

Adjustment Preparation
(1) Go to the Adjust Mode Menu.
(2) Select "DEVICE" in the Adjust Mode Menu as follows.
(3) Press [
ADJUST MODE
IR BLAST
CLOCK TEST
MAINTENANCE
DEVICE
M306H3
ADJ.REV
PANEL TIME
DEVICE : Press 0 button. And press SELECT button to set.
ITEM : Press 2 button. And press SELECT button to set.
DATA : Press [
(4) Unpluged and pluged to update the OSD Design.
Adjustment Procedure
(1) According to a list shown below, select an OSD design.
Class
BACK TO ADJUSTMENTS
] button to access the DEVICE menu.
V01.00
V01.00
265
]buttons to select as follows. And press SELECT button to set.
DATA=2 DIREC Directors Model
DATA=1 A Regional Model
DATA=0 B National Model
Model
X 42/55HDX99
T 42/55HDT79
S 42/55HDS69
DEVICE menu
ADJUST MODE
DEVICE ITEM DATA
0 2 002
DATA OSD Design
50
DW2U