Part Names and Functions
Front View
1 Phones Jack
2 Volume Control
3 BUSY Indicator
4 Tray Panel
5 Emergency Eject Hole
6 Load/Eject
ECDR3001.PM5
1
2
3
This jack is used to connect a set of headphones. Please use
headphones with a stereo mini-jack plug.
This control is used to adjust the headphone volume.
NOTE: This control has no effect on the audio output from the LINE
OUT connector on the back of the CD-ROM reader.
This indicator lights umber while data is being read.
This panel prevents dust from entering the CD-ROM reader.
The CD tray will be ejected when the Load/Eject button is pushed.
Use to remove the disc from the CD-ROM reader if the electrical eject
is disabled by software or if power failure occurs. (See page 14
"Emergency Eject" for details.)
This button is pressed to eject or retract the CD tray when the power
is on.
8
4
5
98.11.20, 3:01 PM
7
6