Download Print this page

Siemens N2250X Installation Instructions page 2

Advertisement

Hazardous Voltage.
Hazardous Voltage.
Will cause death or serious injury.
Will cause death or serious injury.
Turn off and lock out all power supplying this device before
Turn off and lock out all power supplying this device before
working on this device.
working on this device.
Replace all covers before power supplying this device is
Replace all covers before power supplying this device is
turned on.
turned on.
1. Prepare circuit breaker enclosure for neutral installation.
Turn OFF and lock out all power supplying this device before working on the device.
Turn OFF the circuit breaker.
2. Mount neutral as shown below.
Bonding Location
Technical Support:
Subject to change without prior notice
Siemens Industry Inc., Norcross, GA 30092
Tensión peligrosa.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Puede causar la muerte o lesiones graves.
Desenergice totalmente antes de instalar o darle servicio.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
energizar el interruptor.
Bonding
When bonded neutral is required:
• Insert Neutral Bonding Screw into bonding location shown
• Torque Neutral Bonding Screw to 27 lb-ins
• Apply Service Disconnect Label to cover if applicable
Toll Free: 1-800-241-4453
Tension dangereuse.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Danger de mort ou risque de blessures graves.
Couper l'alimentation de l'appareil et barrer avant de
Couper l'alimentation de l'appareil et barrer avant de
travailler.
travailler.
Remplacez touts les couverts avant que
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
l'approvisionnement de pouvoir soit alimenté.
Wire Range
Main Neutral
Service Ground
Torque to 27 lb-ins.
Internet: www.usa.siemens.com/powerdistribution
2 / 2
6 AWG – 350 kcmil CU / AL
6 AWG – 2/0 AWG CU / AL
© Siemens Industry Inc. 2015
I.L. No. 506199B00

Advertisement

loading