Advertisement
GC980W1F_BAUSLLS_ENG
1/19/09
Advanced functions
Your Video has some advanced operations with features you may find useful.
Setting the clock
The Video uses a 24 hour clock, so
that for example 1 pm is represented
as 13:00. Single digit numbers should
be entered with a 0 in front for
instance, 01.
1 Press
to enter the main menu.
Use the 1 or 2 buttons to select
TIME DATE then press OK.
2 Use the numbered buttons or the
3 or 4 on the remote control to
enter the the HOURS, MINUTES,
DAY, MONTH and YEAR.
HH
MM
DD
MM
YY
- -
:
- -
- -
.
- -
.
- - - - - - -
1 2
TIME
DATE
The day of the week will appear
automatically once the date has
been entered. If you make a
mistake use 1 or 2 to select the
item and re-enter the details.
3 Once you are satisfied press
store your settings.
10:18 AM
Page 11
on your Video
On screen display
(OSD)
This can be used to display the
current time, tape counter, tape
remaining, day, month and year, day
of week, channel and operational
mode of your Video on your
television screen. If a recording is
taking place, the on screen displays
will not be recorded onto tape.
1 Press OK to show the OSD.
STOP
SP
AUTO
1. 1. 2004 THU
2 Press OK repeatedly to cycle
i
through the display options.
The tape counter and amount of
tape left will appear if there is a
tape loaded.
3 Press OK again to remove all
OSD's from the television screen.
to
To turn off the on screen displays
completely.
1 Press
to enter the main menu.
2 Select fOSD ON OFF using 1 or
2 then press OK.
3 Select OFF using 3 or 4.
Press
to save the setting.
Resetting the digital
tape counter
The tape counter displays the play
or recording time elapsed in hours
minutes and seconds. Press CLEAR
to reset the counter to 0:00:00.
When you press STOP 9 and press
PR-01
REW 5, the Video will stop at
0:00:00, the point where you reset
the counter.
Lock (Child Lock)
12:00
You can turn off the buttons on the
Control Panel so that your Video can
only be operated using the Remote
Control.
1 Press the LOCK on the Remote
Control. SAFE will appear on the
television screen for a few
seconds.
None of the buttons on the Control
Panel will work apart from EJECT /.
11
SAFE
If any other buttons on the front of
the Video are pressed, SAFE will
appear on the television screen for a
few seconds. To unlock the Child
Lock press the LOCK again on the
Remote Control.
Automatic power off
By pressing the POWER
while
rewinding a tape the Video will turn
off automatically when the tape
rewind has completed.
Advertisement
