Table of Contents
Advertisement
In Use
Setting waypoints
PC*MILER Navigator can route you through a certain point without considering it as a stop.
By setting Waypoints you can adjust PC*MILER Navigator's route, to calculate a detour
via the waypoint.
Select Menu >
•
Enter the address or place in the same way detailed in Selecting a Destination on
•
The address will appear on the trip list as a Stop, with a flag icon
Tap on the address you wish to change to a Waypoint.
A pop-up menu will appear containing a list of options. Tap Set as Waypoint.
•
The address will now be listed as a Waypoint, with an arrow icon
address or place to indicate that is it a Waypoint.
Tip: Make a Waypoint a Stop
To change a Waypoint back to a Stop, tap the address and
select Set as Stop from the pop-up menu.
User's Guide
02 In Use
26
> Plan or Edit Trip.
page 13.
next to it.
in front of the
Advertisement
Table of Contents
