Operating; Basic Operations; Usb Operation; Other Operations - LG NB4534A Owner's Manual

3

Operating

Basic operations

USB operation

1. Connect the USB device to the USB port.
2. Select the USB function by pressing FUNCTION.
3. Select a file you want to play by pressing
C or V.
To
Stop Press Z.
Playback Press d/M.
During playback, press d/M.
Pause
During playback, press C
or V to go to the next file
or to return to the beginning
Skip to the next/
of the current file.
previous file
Press C twice briefly to
step back to the previous file.
Press and hold C/V
Search for a
during playback and release it
section within a
at the point you want to listen
file
to.
Press REPEAT on the remote
control repeatedly, the
Play repeatedly display will be changed in the
or randomly following order, RPT 1 RPT
DIR (DIRECTORY) RPT ALL
RANDOM OFF.
Press 0 to 9 numerical buttons
Select a file
on the remote control to go
directly
to the desired file directly.
The unit memorizes the point at
Resume
which you've changed function
playback
or the unit had been turned off.
,
Note
The resume point may be cleared when you
pull out the power cord or removing the USB
device from the unit.
NB4530A-NE.BDEULLK_ENG_4389.indd 21

Other operations

DRC (Dynamic Range Control)

Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [DRC ON] by using
DRC.

AV Sync

Do this
When receiving audio signals from TV, sound and
images may not be matched. In the case, this
function can adjust the delay time.
1. Press AV SYNC.
2. Use C/V to scroll up and down through

Turn off the sound temporarily

Press MUTE@ to mute your unit.
You can mute your unit, for example, to answer
the telephone, "MUTE" is displayed in the display
window.
To cancel it, press MUTE@ again on the remote
control or change the volume level.
Displaying file and input
source
You can display various information of the input
source by pressing INFO.
USB : MP3/WMA containing file information
OPTICAL/ARC/HDMI IN : Audio format, Audio
channel
the delay amount, which you can set at
anything between 0 and 300ms.
Operating 21
3
2015-03-18 10:32:48