Installation - Kenwood LZ-612IR Instruction Manual

Installation

Installation for Monitor Unit
Before mounting the monitor to the headrest:
• Perform the required external connections first (Accessory ②).
• Using the supplied paper template (Accessory ⑤), mark the area to be cut out of the headrest, then carefully
cut it.
1
Connect Monitor and monitor connection cord (Accessory ②).
2
Install the monitor unit in the bracket (Accessory ⑥).
Template
(Accessory⑤)
Installation for Hideaway Unit
Use screws (Accessory ⑧) to fix Hideaway Unit onto
an audio board or another.
Accessory ⑧
10
|
LZ-612IR
Headrest
Installation plate (not supplied)
Monitor Cable
(Accessory②)
Mounting Bracket
(Accessory⑥)
Screws
(not supplied)
Removing the Monitor Unit
1
Insert the removal tool (Accessory ⑦) deeply into
the slots on TOP side, as shown.
2
Pull the monitor unit all the way out with your
hands, being careful not to drop it.
Monitor Unit
Accessory ⑦