Advertisement
Quick Links
Distributed by Sprue Safety Product Ltd
Sprue Safety Products Ltd, Vanguard Centre, Coventry CV4 7EZ
For more information on SONA Stove Guard contact Technical Support 0800 171 2009
or technicalsupport@sonasafety.com.
SGK510-GuideForUserHigh-UK-SONA-revB-ver2
SGK510-GuideForUserHigh-UK-SONA-revB-ver2 v6.indd 1-2
STOVE GUARD SGEL-SN-1
GUIDE FOR USER
High installations
FOR COOKERS WITH TOUCH CONTROLS
Installation positions higher than 90cm above the cooker top
Cookers with mechanical knobs require an additional reset button (available separately).
When the Stove Guard is installed, the use of an isolator switch to switch off power to
the cooker after cooking is not recommended.
The Stove Guard
observes changing
cooker tempera-
tures. If the Stove
Guard detects a
risk situation, it
signals an alarm
and turns the
cooker off.
The cooker can be
used again when
the temperature has
cooled down to safe
levels (the Control Unit,
behind the cooker,
stops signalling and the
cooker lights turn on).
11/04/2016 10:00
Advertisement
Summary of Contents for Sprue Safety Products SONA SGEL-SN-1
- Page 1 Distributed by Sprue Safety Product Ltd stops signalling and the Sprue Safety Products Ltd, Vanguard Centre, Coventry CV4 7EZ cooker lights turn on). For more information on SONA Stove Guard contact Technical Support 0800 171 2009 or technicalsupport@sonasafety.com.
- Page 2 OPTIONAL FEATURES WHAT DO THE ALARM SIGNALS MEAN? The Intelligent Heat Sensor is above the cooker: Tick the box if in use the alarm signal is a high-tone beep. For full description of Stove Guard features, see the main manual chapter 2.1. The Control Unit is behind the cooker: the alarm signal is a low buzz.
Need help?
Do you have a question about the SONA SGEL-SN-1 and is the answer not in the manual?
Questions and answers