Belkin F9K1116V1 User Manual page 30

may visit http://router/ and perform the setup manually. Please
see "Manual Setup Using Your Browser" earlier in this manual for
more information.
Belkin Setup cannot find my Router.
If Belkin Setup is not able to communicate with your Router during
the installation process, please check the following items.
1) Make sure that the wireless hardware on your computer is turned
on, if available.
2) Try connecting your computer to one of the four "wired" ports on
the Router with an Ethernet cable.
3) Ensure that the Router is on. The front‐panel light should be on.
4) Unplug the Router's power supply for 10 seconds, then plug it back
in.
5) There may be firewall software on your computer preventing an
outgoing connection. You may choose to temporarily disable this
software before attempting setup.
If Belkin Setup still cannot find the Router, you might choose to do
a manual setup. Refer to "Manually Configuring Network Settings"
in this manual for details.
Belkin Setup cannot connect my Router to the Internet.
If Belkin Setup is not able to connect the Router to the Internet,
please check the following items:
1) Use the troubleshooting suggestions within Belkin Setup.
2) If your ISP requires a user name and password, make sure that
you have typed in your user name and password correctly.
Some user names require that the ISP's domain may be at the
end of the name. Example: "myname@myisp.com". The
"@myisp.com" part of the user name may need to be typed as
well as your user name.
3) If you continue to have no Internet connection, refer to
"Manually Configuring Network Settings" in this manual for an
alternative setup method.