Resolution Products RE102 Quick Manual

Wireless
Security
Solutions
RE102 GE-Compatible Pencil Door / Window
Features
• Senses opening or separation. Narrow mounting locations.
• ½ width of competitive products. Great for casements!
• Magnet and Internal reed switch operation.
• Magnet can mount beside or over sensor housing.
• Strong, reliable RF signal.
• 8-10 year battery life on 2-AAA batteries.
Key Instructions
• Battery "+" faces towards white "+" on circuit board.
• Install batteries: rear batt – tail in first, front battery – nose in first.
• Board goes in and out of housing without batteries (not with).
• Reed switch is at the top of the housing, near the push button hole.
• Enrolling:
Place panel in enroll mode.
Disconnect and reconnect battery (simply pull battery
isolator tab, or silver contact away from battery)
Panel will hear special transmission and will enroll.
Operation
• Magnetic reed switch:
Alarm, when...
... magnet is pulled away from reed switch.
• Supervisories, every hour.
RE102_GE-Compat_Pencil_DWS_Instructions.doc
www.ResolutionProducts.com
Page 1 of 3 2-Aug-11
Specifications
Magnet trip distance: 0.75 inch nominal
Mounting hardware: # 4 or #6 screws
Replacement Battery: 2 AAA Alkaline
Temperature Range: 0F to 120F
Housing dimensions: 4 x 0.6 x 0.9 inches.
Specifications subject to change without notice.
Internal Picture
Magnet
position
Reed
Switch
ID Barcode
RE102_GE-Compat_Pencil_DWS_Instructions.doc
www.ResolutionProducts.com
Battery
Positive
Wall mount
plate
Page 2 of 3 2-Aug-11