RIDGID HD0600M0 Owner's Manual page 26

OPERATION
Blowing Feature
Your Vac features a Blowing Port. It can
blow sawdust and other debris. Follow the
steps below to use your Vac as a Blower.
1. Locate the Blowing Port, at the rear of
the Powerhead of your Wet/Dry Vac.
2. Insert the larger end of the Tug-A-
Long Positive Locking Hose with Dual-
Flex into the Blowing Port of the Vac.
Engage the Hose Latch to the lip of the
Blowing Port. The Hose should snap
into place.
3. (Optional) Attach the Extension Wand
to swivel end of the Hose.
4. Turn the Vac on and you are ready to
use your Vac as a Blower.
!
WARNING: Always wear safety
!
WARNING: To reduce the risk
!
Blowing
Port
Hose
Tug-A-Long
Positive Locking
Hose with
Dual-Flex
26
Swivel
End of
Hose
Extension Wand
(Optional)