TheLoudest.com Competition Pro TL-2093 Owner's Manual

Technical Specifications
TL-2093
Number of channels 2 channels
Max Output Power (14.4v) 1000 Watts
Max
RMS Output Power (14.4v) 2 x 75 Watts
@ 4 ohm per channel RMS
RMS Output Power (14.4v) 2 x 120
@ 2 ohm per channel Watts RMS
RMS Output Power (14.4v) 1 x 240
@ 4 ohm (bridge) Watts RMS
RMS Output @ THD+N < 1%:
@ 4 ohm per channel 2 x 60W
@ 2 ohm per channel 2 x 95W
@ 4 ohm bridge 1 x 190W
Sub channel @ 4 ohm n/a
Sub channel @ 2 ohm n/a
Frequency Response
Low Pass/High Pass Filter slopes
Low Pass Filter Range
High Pass Filter Range
Audio Input Level Sensitivity
TDH @ 4 ohm load < 0.02%
(30% Rated Power)
Signal/Noise Ratio
Channel Separation
Minimum load (speaker) impedance
per channel
Minimum load (speaker) impedance
(bridge)
Overheat protection temperature
Power Supply
RCA Audio output Yes – built
in, next to
RCA audio
input.
External fuse 30A
Accessories included 4x mounting
screws
Remote bass controller
Minimum specification of
Power and earth cable
Recommended amplifier wiring kit
Dimensions 186 x 195 x
(length x width x height) 60 mm
All specifications are subject to change due to continued improvement and developments.
All content © Copyright TheLoudest.com 2009
All manuals and user guides at all-guides.com
OWNER'S MANUAL
TL2095 TL-2094 TL-2091 TL-2092
2 channels 4 channels 4 channels 4 channels
2000 Watts 1500 Watts 2000 Watts 3000 Watts
Max Max Max Max
2 x 175 4 x 75 Watts 4 x 100 4 x 160
Watts RMS RMS Watts RMS Watts RMS
2 x 275 4 x 120 4 x 140 4 x 210
Watts RMS Watts RMS Watts RMS Watts RMS
1 x 500 2 x 240 2 x 250 2 x 450
Watts RMS Watts RMS Watts RMS Watts RMS
2 x 165W 4 x 60W 4 x 85W 4 x 135W
2 x 235W 4 x 95W 4 x 120W 4 x 170W
1 x 450W 2 x 190W 2 x 225W 2 x 330W
n/a n/a n/a n/a
n/a n/a n/a n/a
10 Hz – 25 kHz
40 dB/oct
50 ~ 750 Hz
50 ~ 500 Hz
0.2 ~ 5V
< 0.02% < 0.02% < 0.02% < 0.02%
>90 dB
>89 dB
2 ohm
4 ohm
80°C
DC 12V-14.4V
Yes – built No – But RCA No – But RCA No – But RCA
in, next to "Y" splitter "Y" splitter "Y" splitter
RCA audio cables are cables are cables are
input. provided. provided. provided.
40A 40A (must 60A (must 80A (must
be installed be installed be installed
in power in power in power
cable - not cable - not cable - not
included) included) included)
4x mounting 4x mounting 4x mounting 4x mounting
screws screws screws screws
2x "Y" RCA 2x "Y" RCA 2x "Y" RCA
splitter leads splitter leads splitter leads
and blocks and blocks and blocks
No
8 AWG
TL-1192
2000 Watts 3000 Watts
239 x 195 x 239 x 195 x 282 x 195 x 347 x 195 x
60 mm 60 mm 60 mm 60 mm
TL-2096
5 channels
3000 Watts
Max
4 x 100 and
1 x 375
Watts RMS
4 x 140 and
1 x 570
Watts RMS
2 x 285 and
1 x 375
Watts RMS
4 x 85W
4 x 125W
2 x 250W
1 x 280W
1 x 440W
10 Hz – 25
kHz (on 4x
channels)
10 ~ 180 Hz
(on Sub
channel)
n/a on 4x
channels
40 ~ 180 Hz
on Sub
channel
20 ~ 200 Hz
on 4x
channels
10 ~ 50 Hz
on Sub
channel
(Subsonic)
< 0.033% on
4x channels
< 0.075% on
Sub channel
>70 dB
TL-2093 - 2-Channel - 1,000 Watts Max - Up to 240 Watts RMS
2 ohm on all
channels TL-2095 - 2-Channel - 2,000 Watts Max - Up to 500 Watts RMS
4 ohm on 4x
TL-2094 - 4-Channel - 1,500 Watts Max - Up to 480 Watts RMS
channels
2 ohm on
TL-2091 - 4-Channel - 2,000 Watts Max - Up to 560 Watts RMS
Sub channel
TL-2092 - 4-Channel - 3,000 Watts Max - Up to 900 Watts RMS
TL-2096 - 5-Channel - 3,000 Watts Max - Up to 1,130 Watts RMS
No – But RCA
"Y" splitter
cables are
provided.
80A (must be
installed in
power cable -
not included)
4x mounting
screws
2x "Y" RCA
splitter leads
and blocks
Yes
(included)
4 AWG
TL-1191
SAFETY GUIDELINES | TECHNICAL SPECIFICATIONS
385 x 195 x
FEATURES | INSTALLATION AND OPERATION INSTRUCTIONS
60 mm
HIGH PERFORMANCE
MOSFET CLASS AB
CAR AMPLIFIER
OWNER'S
MANUAL