Table of Contents
Advertisement
20
Operating
Starting play from selected
time
ry
To start playing at any chosen time on the file or
title.
1. Press DISPLAY during playback.
2. Press w/s to select the time clock icon and
"--:--:--" appears.
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press CLEAR to remove the
numbers you entered. Then input the correct
numbers.
For example, to find a scene at 1 hour, 10
minutes, and 20 seconds, enter "11020" by using
numerical buttons.
4. Press ENTER to confirm. Playback starts from
the selected time.
4
Last Scene Memory
r
This unit memorizes the last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the player or
switch off (Stand-by mode) the unit. If you load a
disc that has the scene memorized, the scene is
automatically recalled.
Power Resume - Optional
r
Even if the power suddenly goes out, turn on the
unit and then it plays a position where the contents
is being played. System will periodically save
current playback status.
Changing the character set to
display DivX® subtitle correctly
y
If the subtitle does not display properly during
playback press and hold S-TITLE for about 3
seconds then press a/d or S-TITLE to select
another language code until the subtitle is
displayed properly and then press ENTER.
DH3140S-F0_ANGAFLK_ENG_5469.indd 20
Programmed Playback
tu
The program function enables you to store your
favourite files from any disc or USB device.
A program can contain 30 tracks/ files.
1. Select the DVD/CD or USB function by pressing
FUNCTION.
2. To add a music(s) on the program list, press
PROG./MEMO. to enter the program edit mode
({ icon appears on the menu).
3. Select a desired music on the [List] by using the
w/s then press ENTER to add the music to
the program list.
4. Select music from the program list then press
ENTER to start programmed playback.
5. Press PROG./MEMO. to exit the program edit
mode ({ icon disappears on the menu).
Erasing a file from Program List
1. Press PROG./MEMO. to enter the program edit
mode ({ icon appears on the menu).
2. Use w/s to select the track that you wish to
erase from the Program list.
3. Press CLEAR.
Erasing the Complete Program List
Use w/s/a/d to select [Clear All] then press
ENTER.
,
Note
The programs are also cleared when the disc or
USB device is removed, the unit is switched to
power off or the function is switched to others.
2014-06-30
2:14:16
Advertisement
Table of Contents
