Adjusting The Osd Settings; Adjusting The Picture Quality - Acer EB275U User Manual

Hide thumbs Also See for EB275U:

Table of Contents

Adjusting the OSD settings

Note: The following content is for general reference only. Actual product specifications may

vary.

The OSD can be used for adjusting the settings of your LCD Monitor. Press the

open the OSD. You can use the OSD to adjust the picture quality, OSD setting and general

settings. For advanced settings, please refer to following page:

1. Press the

2. Using the

picture element you wish to adjust.

3. Use the / keys to adjust the sliding scales.

4. The Picture menu can be used to adjust the current Brightness, Contrast, Black

Boost,BlueLight, ACM,Super Sharpness qualities.

5. Brightness: Adjust the brightness from 0 to 100.

-----------------------------------------------------------------------------------------------------------

Note: Adjusts the balance between light and dark shades.

6. Contrast: Adjust the contrast from 0 to 100.

-----------------------------------------------------------------------------------------------------------

Note: Sets the degree of difference between light and dark areas.

7. Black Boost: Adjust the black level from 0 to 10. Enhances shadows by increasing the

brightness without changing lighter shades.

8. Blue Light: Filters out blue light to protect your eyes by adjusting how much blue light

is shown -- 80%, 70%, 60%, or 50%.

-----------------------------------------------------------------------------------------------------------

Note: A higher value allows more blue light to pass through, so in order to

achieve the best protection, please select a lower value, of which 50% is in the

best state and has been tested by TÜV Rheinland and meet the requirements of

TÜV Rheinland's "Low Blue Light Content" standard.

key to bring up the OSD.

keys, select

Picture from the OSD menu. Then navigate to the

key to

Table of Contents