Samsung PL51E530A3F User Manual

Plasma TV
user manual
• Caution
Figures and illustrations in this User Manual are provided for reference
only and may differ from actual product appearance. Product design and
The glass screen of your PDP TV can break if you accidently drop the TV. Handle
specifications may be changed without notice.
the TV with care. When moving the TV, always have two or more people pick it
up and carry it as a safety precaution. Do not lay the TV flat on its face or back.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure (Your) Samsung Plasma TV is a high quality television that has been carefully packaged to
proper ventilation. protect the integrity of its glass panel and component parts during shipment. It is, nonetheless,
a fragile piece of electronics that requires careful handling. Refrain from putting undue stress
Failing to do so may result in fire or a problem with the product due to an increase in the internal
on any part of the packaging when shipping or unpacking the TV. Use care when installing the
temperature of the product.
TV. Avoid placing the TV in a location where it may be struck, exposed to sharp impacts, or
✎
fall. Panel breakage caused by a fall or impact strike is not covered under the manufacturer's
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
x warranty.
If you use parts provided by another manufacturer, it may result in a problem with
the product or an injury due to the product falling.
✎
The appearance may differ depending on the product.
Contact SAMSUNG WORLDWIDE
✎
Be careful when you contact the TV because some parts can be somewhat hot.
If you have any questions or comments relating to Samsung
Installation with a stand. Installation with a wall-mount.
products, please contact the SAMSUNG customer care center.
4inches 4inches
Country Customer Care Center 
4inches 4inches 4inches 4inches
MEXICO 01-800-SAMSUNG(726-7864)
ARGENTINA 0800-333-3733
4inches
0800-124-421
BRAZIL
4004-0000
Important User Information
CHILE 800-SAMSUNG(726-7864)
• Screen Image retention
COLOMBIA 01-8000112112
D o not display a still image (such as that from a video game) on the plasma display panel for
more than a few minutes. Still images can cause screen image retention (burn in). To avoid
COSTA RICA 0-800-507-7267
such image retention, reduce the degree of brightness and contrast of the screen when
displaying a still image.
DOMINICA 1-800-751-2676
• Heat on the top of the Plasma TV
The top side of the TV may become hot after long periods of use as heat dissipates from ECUADOR 1-800-10-7267
the panel through the vent hole in the upper part of the TV. This is normal and does not
indicate any defect or operational failure of unit. EL SALVADOR 800-6225
However, children should be prevented from touching the upper part of the TV.
GUATEMALA 1-800-299-0013
• The TV is making a 'cracking' noise.
• Cell Defects HONDURAS 800-7919267
The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels
JAMAICA 1-800-234-7267
which require sophisticated technology to produce. However, there may be a few bright
or dark pixels on the screen. These pixels will have no impact on the performance of the
NICARAGUA 00-1800-5077267
product.
• Avoid operating the TV at temperatures below 41°F (5°C)
PANAMA 800-7267
• A still image displayed too long may cause permanent damage to the PDP Panel.
PERU 0-800-777-08
Watching the Plasma TV in 4:3 format for a long period of time may leave
PUERTO RICO 1-800-682-3180
traces of the borders on the left, right, top, or bottom of the screen.
Playing a DVD or a game console may have a similar effect. Damage
TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864)
caused by the above effect is not covered by the warranty.
VENEZUELA 0-800-100-5303
• After-images on the Screen.
The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level)
pixels which require sophisticated technology to produce. However, there may be
a few bright or dark pixels on the screen. These pixels will have no impact on the
(MEXICO Only)
performance of the product.
• Warranty IMPORTADO POR: SAMSUNG ELECTRONICS MÉXICO S.A. de C.V.
Warranty does not cover any damage caused by image retention. AV. PRESIDENTE MASARIK #111 INT701
Burn-in is not covered by the warranty.
COL. CHAPULTEPEC MORALES C.P.11570
DELEGACION MIGUEL HIDALGO MEXICO. DISTRITO FEDERAL
Tel: 01-55-5747-5100 / 01-800-726-7864
© 2012 Samsung Electronics Co., Ltd. All rights reserved.
BN68-04216D-01
- 1 -
BN68-04216D
Channel Menu ❑ Other Features
Clear Scrambled Channel
❑ Seeing Channels
This function filters out scrambled channels after Auto Program is
completed. This process may take up to 20~30 minutes.
Channel List
✎
Press the ENTERE button to stop the Clear Scrambled Channel.
Add, delete or set Favorite channels and use the program guide for ✎
This function is only available in Cable mode.
digital broadcasts. Select a channel in the All Channels, Added
Channels, Favorite or Programmed screen by pressing the ▲ / ▼
Channel List
buttons, and pressing the ENTERE button. Then you can watch the
selected channel.
Channel List Option Menu t
6 Air Set each channel using the Channel List menu options. Option menu
items may differ depending on the channel status.
6-1 ♥ TV #6
■ Add / Delete: Delete or add a channel to display the channels you want. ■
7-1 ♥ TV #7
✎
All deleted channels will be shown on the All Channels menu.
8 Air
✎
9 Air A gray-colored channel indicates the channel has been deleted.
9-1 ♥ TV #9 ✎
The Add menu only appears for deleted channels.
10 Air
✎
10-1 ♥ TV #10 Delete a channel from the Added Channels or Favorite menu in the
11-1 ♥ TV #11 same manner.
Air ' Zoom ' Select T Tools ► Next Program
■ Add to Favorite / Delete from Favorite t : Set channels you watch ■
frequently as Favorites.
All Channels: S hows all currently available channels.
■ ■
■ Timer Viewing: You can set a desired channel to be displayed automatically ■
■ Added Channels: Shows all added channels.
■
at the set time; even when you are watching another channel. Set the
■ ■ * Favorite: Shows all favorite channels.
current time first to use this function.
■ ■ Programmed: S hows all currently reserved programs. ✎
Only memorized channels can be reserved.
✎
Reserved programs will be displayed in the Programmed menu.
✎
Using the remote control buttons with the Channel List
✎
x When a digital channel is selected, press the ► (Next
Green (Zoom): Enlarges or shrinks a channel number.
Program) button to view the digital program. If you select the
x
Yellow (Select): Selects multiple channel lists. Select desired
ENTERE(Schedule) button on the next program, you can set
channels and press the Yellow button to set all the selected channels
Timer Viewing directly.
at the same time. The c mark appears to the left of the selected
■ Channel Name Edit (analog channels only): Assign your own channel ■
channels.
name.
x
T (Tools): Displays the Channel List option menu. (The Options
■ Select All: Select all the channels in the channel list. ■
menus may differ depending on the situation.)
■ Deselect All: Deselect all the selected channels. ■
Channel Status Display icons
✎ You can only select Deselect All when one or more channels are
selected.
Icons Operations
■ Auto Program: Scans for a channel automatically and stores in the TV. ■
c A channel selected.
Programmed
* A channel set as a Favorite.
(in Channel List)
) A reserved program.
You can view, modify or delete a show you have reserved to watch.
( A program currently being broadcast.
■ Change Info: Change a show you have reserved to watch. ■
■ Cancel Schedules: Cancel a show you have reserved to watch. ■
■ Information: Display a show you have reserved to watch. (You can also ■
❑ Memorizing channels
change the reservation Information.)
■ Select All / Deselect All: You can select or deselect all channels in the ■
Antenna (Air / Cable) t
channel list.
Before your television can begin memorizing the available channels, you
Channel Mode
must specify the type of signal source that is connected to the TV (i.e. an
Air or a Cable system). Change the channel mode directly between Added Channels and
Favorite Channels.
Auto Program
✎ The Favorite Channels is enabled only when you set Add to Favorite.
✎
When selecting the Cable TV system: Selects the cable system. STD,
Fine Tune
HRC and IRC identify various types of cable TV systems. Contact your
local cable company to identify the type of cable system that exists in
(analog channels only)
your particular area. At this point, the signal source has been selected.
If the reception is clear, you do not have to fine tune the channel, as this
✎
After all the available channels are stored, it starts to remove scrambled
is done automatically during the search and store operation. If the signal
channels. The Auto program menu then reappears.
is weak or distorted, fine tune the channel manually.
✎
Press the ENTERE button to stop the channel store during Auto
✎
Fine tuned channels that have been saved are marked with an asterisk
Program.
"*" on the right-hand side of the channel number in the channel banner.
How to Stop Auto Programming
✎
To reset the fine-tuning, select Reset.
1. Press the ENTERE button.
2. A message will ask Stop Auto Program? Select Yes by pressing the ◄ or
► button.
3. Press the ENTERE button.
- 5 -
✎
Exits the menu when pressing the controller more than 1 second.
Getting Started
✎
When selecting the function by moving the controller to the up/down/
left/right directions, be sure not to press the controller. If you press it
Accessories
first, you cannot operate it to move the up/down/left/right directions.
• Remote Control & Batteries (AAA x 2) Plug & Play (Initial Setup)
• Warranty Card / Safety Guide
When you turn the TV on for the first time, a sequence of on-screen
• Owner's Instructions
prompts will assist in configuring basic settings. Press the POWER
• Power Cord
button. Plug & Play is available only when the Input source is set to TV.
• Cleaning Cloth
✎
Connecting the power cord and antenna. (refer to 'Connections')
Input Cables (Sold Separately)
• RS232 • Component
• Audio • Composite (AV)
• HDMI • Coaxial (RF)
Select Language of the OSD.
• HDMI-DVI
Language
✎
Check the cable before plug-in
Cable Ports
HDMI
USB
Select 'Home Use' when installing this TV in your home.
Optical
Store Demo
Do not plug cable upside down.
Web Site Be sure to check before plug-in.
www.samsung.com
TV Controller (Panel Key)
www.samsung.com
Function menu
www.samsung.com
MEDIA.P
www.samsung.com
m R s
Select the Antenna source to memorize.
www.samsung.com
P
Air
www.samsung.com
Return
Cable
www.samsung.com
TV Controller
Auto
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Remote control sensor
www.samsung.com
www.samsung.com
Turns the TV on by pressing the controller in standby Set the Clock Mode.
Power on
mode.
www.samsung.com
Clock Mode
Adjusts the volume by moving the controller from side to
www.samsung.com Adjusting the volume
side when the power is on.
www.samsung.com
Selects a channel by moving the controller up and down
Selecting a channel
when the power is on.
www.samsung.com
Press the controller when the power is on, then the
Using the function menu function menu screen appears. If you press it again, the
function menu screen disappears.
Selects the MEDIA.P by moving the controller in the
Selecting the Media Play function menu screen. The Media Play main screen
appears.
The connection method for the best HD screen quality is displayed.
Selects the MENU(m) by moving the controller in the
Selecting the MENU (m) function menu screen. The OSD(On Screen Display) of
your TV's feature appears.
Selects the Source List (s) by moving the controller
Selecting the Source
in the function menu screen. The Source List screen
List (s)
appears.
Press the
Selects the Power Off (P) to turn the TV off by moving
Power Off (P)
the controller in the function menu screen.
- 2 -
✎
Picture Sizes available by Input Source:
Picture Menu
Input Source
ATV, AV, Component (480i, 480p)
Mode t
DTV(1080i, 1080p), Component (1080i,
Select your preferred picture type.
1080p), HDMI (720p, 1080i, 1080p)
✎
When connecting a PC, you can only select Entertain and Standard.
■ Digital Noise Filter (Off / Low / Medium / High / Auto) : If the broadcast ■
■ Dynamic: Suitable for a bright room.
■
signal received by your TV is weak, you can activate the Digital Noise Filter
■ Standard: Suitable for a normal environment. ■
feature to reduce any static and ghosting that may appear on the screen.
■ Movie: Suitable for watching movies in a dark room. ■ ✎ When the signal is weak, try other options until the best picture is
displayed.
■ Entertain: Suitable for watching movies and games. ■
✎ Only available when connecting a PC.
■ HDMI Black Level (Normal / Low) : Selects the black level on the screen to ■
adjust the screen depth.
Cell Light / Contrast / Brightness / Sharpness / ✎
Available only in HDMI mode (RGB signals).
■ Film Mode (Off / Auto) : Sets the TV to automatically sense and process film ■
Color / Tint (G/R)
signals from all sources and adjusts the picture for optimum quality.
Your television has several setting options for picture quality control.
✎
Available in ATV, DTV(interlace), AV, COMPONENT (480i / 1080i) and
✎
When connecting a PC, you can only make changes to Cell Light, HDMI (480i / 1080i).
Contrast, Brightness and Sharpness
■ Screen Burn Protection : To reduce the possibility of screen burn, this unit is
■
equipped with Pixel Shift screen burn prevention technology. Pixel Shift moves
Advanced Settings the picture slightly on the screen. The Time function setting allows you to
program the time between movement of the picture in minutes.
(available in Standard / Movie mode)
Your TV also has the following additional screen burn protection functions:
x
Compared to previous models, new Samsung TVs have a more precise
Pixel Shift (Off / On) : Using this function, you can set the TV to move
picture.
pixels minutely on the PDP screen in a horizontal or vertical direction to
✎ minimize after images on the screen.
When connecting a PC, you can only make changes to Gamma and
White Balance. ✎
Available Pixel Shift Settings and Optimum Settings
■ Color Space (Auto / Native): Adjusts the range of colors available to create
■
the image.
■ White Balance: Adjusts the color temperature for a more natural picture. ■
Horizontal
R-Offset / G-Offset / B-Offset: Adjusts each color's (red, green, blue)
darkness. Vertical
R-Gain / G-Gain / B-Gain: Adjusts each color's (red, green, blue)
Time (minute)
brightness.
✎
Reset: Resets the White Balance to it's default settings. The Pixel Shift value may differ depending on the monitor size
(inches) and mode.
■ Gamma: Adjusts the primary color intensity. ■
✎
This function is not available in the Screen Fit mode.
■ Dynamic Contrast (Off / Low / Medium / High): Adjusts the screen contrast. ■
x
■ Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust ■ Scrolling: This function removes after-images on the screen by
the screen depth. illuminating all the pixels on the PDP according to a pattern. Use
■ Flesh Tone: Emphasize pink "flesh tone". ■ this function when there are after images or symbols on the screen,
especially when you displayed a still image on the screen for a long
■ Motion Lighting (Off / On): Reduce power consumption by brightness ■
time.
control adapted motion.
✎
✎ The after-image removal function has to be executed for a long
Available in Standard mode only.
time (approximately 1 hour) to effectively remove after-images on
the screen. If the after-image is not removed after you apply the
Picture Options
function, repeat the function again.
✎
When connecting a PC, you can only make changes to the Color Tone,
✎
Press any key on the remote control to cancel this feature.
Size and HDMI Black Level.
x
Side Gray (Light / Dark): When you watch TV with the screen ratio set
■ Color Tone (Cool / Standard / Warm1 / Warm2) ■
to 4:3, using the Side Gray function can prevent damage to the edges
✎
Warm1 or Warm2 will be deactivated when the picture mode is of the screen by adjusting the white balance on the extreme left and
Dynamic. right sides.
■ Size: Your cable box/satellite receiver may have its own set of screen sizes as ■
Picture Reset
well. However, we highly recommend you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide mode.
Resets your current picture mode to its default settings.
Zoom1: Use for moderate magnification.
■ Reset Picture Mode: Returns all picture values in the currently selected mode ■
Zoom2: Use for a stronger magnification.
to the default settings.
Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.
4:3: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces of borders displayed
on the left, right and center of the screen may cause image retention
(screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p
/ 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
✎
HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720).
✎
Settings can be adjusted and stored for each external device you have
connected to an input on the TV.
- 6 -
Connections
• For better picture and audio quality, connect to a digital device using an
HDMI cable.
• The picture may not display normally (if at all) or the audio may not work if
an external device that uses an older version of HDMI mode is connected
to the TV. If such a problem occurs, ask the manufacturer of the external
device about the HDMI version and, if out of date, request an upgrade.
• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not
display or a connection error may occur.
• PC(D-Sub) and PC/DVI AUDIO IN input are not supported.
Selecting a language
Select the desired OSD (On Screen
Plug & Play
Display) language.
English
  Español
Français
U Move E Enter

VHF/UHF Antenna


Selecting a Home Use mode
• Select the Home Use mode.
Plug & Play
or
Store Demo mode is for retail
ANT OUT
environments.

 • When pressing TV controller, the
Home Use function menu screen appears.
Cable
L Move E Enter Select the MENU(m) and press

it more than 5 seconds using the

controller. The Store Demo mode
is set. Cancel the Store Demo by
selecting Source List(s) and
pressing it more than 5 seconds.

(5V 0.5A)
Media Play
Selecting an antenna
Using a USB Drive
In Cable mode, you can select the
Plug & Play
correct signal source among STD,
HRC, and IRC by pressing the ▲,
Start
▼, ◄ or ► button.
Start
Start




U Move
E Enter m Skip OPTICAL

Setting the Clock Mode
Digital Audio System
Set the Clock Mode automatically Audio Device
Plug & Play
or manually.
Using an Optical (Digital)
• If you select the Auto, set the Cable


DST(Daylight Saving Time).
: Auto
Changing the Input Source
• On the DST screen, press

 ENTERE, then select whether to
E Enter m Skip turn DST (Daylight Savings Time)
on or off. Select the time zone
Source List
where you live.
Use to select TV or an external input source such as a DVD player / Blu-ray

player / cable box / STB satellite receiver.
Viewing the HD Connection Guide
1. Press the SOURCE button.
2. Select a desired external input source.
■ TV / AV / Component / HDMI1/DVI / HDMI2 ■

✎
You can only choose external devices that are connected to the TV. In the
Enjoy your TV.
Source List, connected inputs will be highlighted.
ENTERE button. How to use Edit Name
Edit Name lets you associate a device name to an input source. To access
Edit Name, press the TOOLS button in Source List. The following
selections appear under Edit Name:
Sound Menu
Picture Size
16:9, Zoom1, Zoom2, 4:3 Mode t
16:9, Wide Fit, 4:3, Screen Fit ■ Standard: Selects the normal sound mode. ■
■ Music: Emphasizes music over voices. ■
■ Movie: Provides the best sound for movies.
■
■ Clear Voice: Emphasizes voices over other sounds. ■
■ Amplify: Increase the intensity of high-frequency sounds to allow a better ■
listening experience for the hearing impaired.
Equalizer
(standard sound mode only)
■ Balance L/R: Adjusts the balance between the right and left speaker. ■
■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): Adjusts the ■
level of specific bandwidth frequencies.
■ Reset: Resets the equalizer to its default settings. ■
SRS TruSurround HD
(standard sound mode only)
SRS TruSurround HD is a patented SRS technology that solves the
problem of playing 5.1 multichannel content over two speakers.
TruSurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television
speakers. It is fully compatible with all multichannel formats.
Preferred Language
Optimum Settings for TV/AV/
Available Settings (digital channels only)
Component/HDMI
Digital-TV broadcasts are capable of simultaneous transmission of many
0~4(pixels) 4
audio tracks (for example, simultaneous translations of the program into
0~4(pixels) 4
foreign languages).
1~4 min 4 min
✎ You can only select a language from among the ones being broadcasted.
Multi-Track Sound (MTS)
(analog channels only)
■ Mono: Choose for channels that are broadcasting in mono or if you are ■
having difficulty receiving a stereo signal.
■ Stereo: Choose for channels that are broadcasting in stereo. ■
■ SAP: Choose to listen to the Separate Audio Program, which is usually a ■
foreign-language translation.
✎
Depending on the program being broadcast, you can listen to Mono,
Stereo or SAP.
Auto Volume
Because each broadcasting station has its own signal conditions, the
volume may fluctuate each time channel is changed. This feature lets you
automatically adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by raising the sound
output when the modulation signal is low.
SPDIF Output
The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed digital
audio signal when you connect the digital audio jack on the back of the TV
to a digital audio in jack on a receiver or home theater.
■ Audio Format: You can select the Digital Audio output (SPDIF) format. The ■
available Digital Audio output (SPDIF) format may differ depending on the
input source.
✎
By connecting the TV to a receiver or home theater with Dolby Digital
and 5.1ch speakers and selecting Dolby Digital, you can maximize
your interactive 3D sound experience.
■ Audio Delay: Lets you correct timing mismatches between the audio track ■
and the video when you are watching the TV and listening to digital audio
output from the TV through an external device such as an AV receiver. When
you select Audio Delay, a slider appears. Use the left and right arrow buttons
to adjust the slider. Press ENTERE when done (0ms ~ 250ms).
Remote Control
✎
This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.
• For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
• Connecting through the HDMI cable may not be supported depending on the
PC.
• If an HDMI to DVI cable is connected to the HDMI IN 1(DVI) port, the audio
does not work.
• EX-LINK: Connector for service only.
• The PDP device may interfere with an amateur radio or AM radio.
• When using two-way radio mobile and portable units or amateur radio or AM
radio near by your TV, this may cause the TV to malfunction.
AV Device (1)
Using a HDMI Cable (up to
1080p)
Power Input
Blu-ray player / DVD /
Press to select additional channels (digital) being
HDMI OUT cable box / sat box broadcasted by the same station. For example,
to select channel '54-3', press '54', then press
Displays the channel list on the screen.
PC
Quickly select frequently used functions.
PC
Selects the on-screen menu items and changes the
Using a HDMI (to DVI) Cable
P.SIZE: Lets you choose the picture size.
MTS: Press to choose stereo, mono or
Separate Audio Program (SAP broadcast).
R W R Y
R B R G R W
R B R G R W R W Y
COMPONENT OUT AUDIO OUT AUDIO OUT VIDEO OUT
P P Y R-AUDIO-L R-AUDIO-L
R B
Blu-ray player VCR
Display Modes (HDMI/DVI Input)
AV Device (3) AV Device (2)
Optimal resolution is 1920 x 1080@60Hz.
Using a Component Using an Audio/Video
Cable (up to 1080p)
Mode Resolution
640 x 350
■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game ■ IBM
720 x 400
/ Camcorder / PC / DVI PC / DVI / TV / IPTV / Blu-ray / HD DVD / DMA:
640 x 480
Name the device connected to the input jacks to make your input source MAC 832 x 624
1152 x 870
selection easier.
640 x 480
✎
When connecting a PC to the HDMI IN 1(DVI) port with HDMI cable, you
640 x 480
should set the TV to PC mode under Edit Name. 640 x 480
800 x 600
✎
When connecting a PC to the HDMI IN 1(DVI) port with HDMI to DVI
800 x 600
cable, you should set the TV to DVI PC mode under Edit Name. 800 x 600
1024 x 768
✎
When connecting an AV devices to the HDMI IN 1(DVI) port with HDMI to
1024 x 768
DVI cable, you should set the TV to DVI mode under Edit Name. 1024 x 768
VESA DMT 1152 x 864
Information
1280 x 720
1280 x 800
You can see detailed information about the connected external device.
1280 x 1024
1280 x 1024
1366 x 768
1440 x 900
1600 x 900RB
1680 x 1050
1920 x 1080
- 3 -
Speaker Select
❑ Other Features
■ Speaker Select (External Speaker / TV Speaker) ■
If you are listening to the sound track of a broadcast or movie through
Program Rating Lock
an external receiver, you may hear a sound echo caused by the
difference in decoding speed between the TV's speakers and the The Program Rating Lock feature automatically locks out programs
speakers attached to your audio receiver. If this occurs, set the TV to that are deemed inappropriate for children. The user must enter a PIN
External Speaker. (personal identification number) before any of the Program Rating Lock
✎ restrictions are set up or changed.
When you set Speaker Select to External Speaker, the TV's
speakers are turned off. You will hear sound through the external ✎ Program Rating Lock is not available in HDMI or Component mode.
speakers only. When you set Speaker Select to TV Speaker both the
✎
The default PIN number of a new TV set is "0-0-0-0".
TV's speakers and the external speakers are on. You will hear sound
through both. ■ Program Rating Lock: You can block rated TV Programs. ■
■ TV Parental Guidelines: You can block TV programs depending on their ■
✎ When Speaker Select is set to External Speaker, the VOLUME and
rating. This function allows you to control what your children are watching.
MUTE buttons will not operate and the sound settings will be limited.
■ MPAA Rating: You can block movies depending on their MPAA rating. The ■
✎
If there is no video signal, both the TV's speakers and the external
Motion Picture Association of America(MPAA) has implemented a rating
speakers will be mute.
system that provides parents or guardians with advanced information on
which films are appropriate for children.
Sound Reset
■ Canadian English: You can block TV programs depending on their ■
Anglophone Canadian.
■ Reset All: Resets all sound settings to the factory defaults. ■
■ Canadian French: You can block TV programs depending on their French
■
Canadian rating.
Setup Menu
■ Downloadable U.S. Rating: Parental restriction information can be used ■
while watching DTV channels.
■ Change PIN: The Change PIN screen will appear. Choose any 4 digits ■
❑ Setting the Time for your PIN and enter it in Enter New PIN. Re-enter the same 4 digits in
Confirm New PIN. When the Change PIN screen disappears, press the
OK button. The TV has memorized your new PIN.
Time
✎ If you forget the PIN, press the remote-control buttons in the
following sequence, which resets the pin to "0-0-0-0" : POWER
✎ The current time will appear every time you press the INFO button.
(off) → MUTE → 8 → 2 → 4 → POWER (on)
■ Clock: Setting the clock is for using various timer features of the TV. ■
✎
If you disconnect the power cord, you have to set the clock again. Language
Clock Mode: Set the current time manually or automatically.
Set the menu language.
Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.
✎ Choose between English, Español and Français.
✎
Available only when Clock Mode is set to Manual.
Time Zone: Select your time zone.
Game Mode
DST (Daylight Saving Time): Switches the DST (Daylight Saving Time)
When connecting to a game console such as PlayStation™ or Xbox™,
function on or off.
you can enjoy a more realistic gaming experience by selecting the
✎
DST and Time Zone function is only available when the Clock Mode
game menu.
is set to Auto.
✎ Precautions and limitations for game mode
■ Sleep Timer t
■
x
To disconnect the game console and connect another external
Automatically shuts off the TV after a preset period of time. (30,
device, set Game Mode to Off in the setup menu.
60, 90, 120, 150 and 180 minutes).
x
If you display the TV menu in Game Mode, the screen shakes
✎
To cancel the Sleep Timer, select Off.
slightly.
✎
Game Mode is not available when the input source is set to TV.
Timer 1 / Timer 2 / Timer 3
✎
After connecting the game console, set Game Mode to On.
Three different on / off timer settings can be made. You must set the clock
Unfortunately, you may notice reduced picture quality.
first.
Caption
■ On Time / Off Time: Set the hour, minute, am/pm and Activate / Inactivate. ■
(To activate the timer with the setting you have chosen, set to Activate.)
(On-Screen Text Messages)
■ Volume: Set the desired volume level. ■
■ Caption: You can switch the caption function on or off. If captions are not ■
■ Contents: When the On Time is activated, you can turn on a specific channel ■
available, they will not be displayed on the screen.
or play back contents such as photo or audio files.
✎ The Caption feature does not work in Component or HDMI mode.
- TV/USB: Select TV or USB. (Make sure that an USB device is
connected to your TV.) ■ Caption Mode: You can select the desired caption mode. ■
- Antenna: Displays the current antenna source. Default / CC1~CC4 / Text1~Text4: (analog channels only) The
Analog Caption function operates in either analog TV channel mode
- Channel: Select the desired channel.
or when a signal is supplied from an external device to the TV.
- Music/Photo: Select the folder containing MP3/JPEG files on the
(Depending on the broadcasting signal, the Analog Caption function
USB device.
may or may not work with digital channels.)
✎
The maximum displayed number of files, including sub folders, in one
Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (digital
folder of USB storage device is 2000.
channels only) The Digital Captions function works with digital
✎
The media may not be playing smoothly when using the device lower channels.
than USB 2.0. ✎
Service1~6 may not be available in digital caption mode depending
■ Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual ■ on the broadcast.
to set at you convenience. If you select Manual, you can set up the day you
want to activate the timer.
- 7 -
Displays and selects the available video
sources.
Turns the TV on and off.
Turns the remote control light on or off. When on,
the buttons become illuminated for a moment when
pressed. (Using the remote control with this button set
to On will reduce the battery usage time.)
Press to directly access to channels.
Returns to the previous channel.
'-' and '3'. Cuts off the sound temporarily.
Adjusts the volume. Changes channels.
Displays the main on-screen menu.
Views the Media Play. MEDIA.P SLEEP
Automatically shuts off the TV at a preset
time.
Displays information on the TV screen.
values seen on the menu.
Returns to the previous menu. Exit the menu.
Use these buttons according to the
direction on screen.
Use these buttons in a specific feature.
CC: Controls the caption decoder.
Installing batteries (Battery size: AAA)
Horizontal Vertical Frequency Pixel Clock Sync Polarity
Frequency (KHz) (Hz) Frequency (MHz) (H / V)
31,469 70,086 25,175 +/-
31,469 70,087 28,322 -/+
35,000 66,667 30,240 -/-
49,726 74,551 57,284 -/-
68,681 75,062 100,000 -/-
31,469 59,940 25,175 -/-
37,861 72,809 31,500 -/-
37,500 75,000 31,500 -/-
37,879 60,317 40,000 +/+
48,077 72,188 50,000 +/+
✎
46,875 75,000 49,500 +/+ NOTE
48,363 60,004 65,000 -/- x
Use the remote control within 23 feet from TV.
56,476 70,069 75,000 -/-
60,023 75,029 78,750 +/+ x
Bright light may affect the performance of the remote control. Avoid
67,500 75,000 108,000 +/+
use when nearby fluorescent lights or neon signs.
45,000 60,000 74,250 +/+
x
49,702 59,810 83,500 -/+
The Color and shape may vary depending on the model.
63,981 60,020 108,000 +/+
79,976 75,025 135,000 +/+
47,712 59,790 85,500 +/+
55,935 59,887 106,500 -/+
60,000 60,000 108,000 +/+
65,290 59,954 146,250 -/+
67,500 60,000 148,500 +/+
- 4 -
■ Digital Caption Options: (digital channels only) ■
Size: Options include Default, Small, Standard and Large. The
default is Standard.
Font Style: Options include Default and Styles 0 to 7. The default
is Style 0.
Foreground Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan.
You can change the color of the letter. The default is White.
Background Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. You can change the
background color of the caption. The default is Black.
Foreground Opacity: This adjusts the opacity of text. Options
include Default, Transparent, Translucent, Solid and Flashing.
Background Opacity: This adjusts the opacity of the caption
background. Options include Default, Transparent, Translucent, Solid
and Flashing.
Return to Default: This option sets each Size, Font Style,
Foreground Color, Background Color, Foreground Opacity and
Background Opacity to its default.
✎
Digital Caption Options are available only when Default and
Service1 ~ Service6 can be selected in Caption Mode.
✎
The Foreground and Background cannot be set to have the same
color.
Melody
Set so that a melody plays when the TV is turned on or off.
✎ The Melody does not play.
x
When no sound is output from the TV because the MUTE button
has been pressed.
x
When no sound is output from the TV because the volume has been
reduced to minimum with the VOL
– button.
x
When the TV is turned off by Sleep Timer function.
Auto Protection Time
■ Auto Protection Time (Off / 10 min / 20 min / 40 min / 1 hour): If the ■
screen remains idle with a still image for a certain period of time defined
by the user, the screen saver is activated to prevent the formation of ghost
images on the screen.
Eco Solution
■ Energy Saving (Off / Low / Medium / High / Picture Off) : This adjust ■
the brightness of the TV in order to reduce power consumption. If you
select Picture Off, the screen is turned off, but the sound remains on.
Press any button except volume button to turn on the screen.
■ Eco Sensor (Off / On) : To enhance your power savings, the picture ■
settings will automatically adapt to the light in the room.
✎
If you adjust Cell Light in the Picture menu, the Eco Sensor will
be set to Off.
Min Cell Light : When Eco Sensor is On, you can manually adjust
the minimum screen brightness.
✎
If Eco Sensor is On, the display brightness may change (become
slightly darker or brighter) depending on the surrounding light
intensity. You can control the screen's minimum brightness with the
Min Cell Light function.
■ No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets how quickly ■
the TV switches to standby mode, if no picture is being received.
✎
Disabled when the PC is in power saving mode.
■ Auto Power Off (Off / On): The TV will be automatically turned off when ■
no user operation is received for 4 hours.
- 8 -