D-Link DCS-8000LH/E User Manual page 20

Section 3 - Using the Mobile App
Motion Detection
On this page you can tap Motion Detection to enable or disable it.
To customize your motion detection, tap Active Area to enter the configuration screen. You can tap
on the image to activate red squares for areas you wish to detect motion in.
Tap Clear All to remove all motion detection areas.
Adjust the Sensitivity percentage until your desired motion detection results are achieved. Higher
sensitivity will trigger smaller movements. Then tap the back button on your mobile and tap Apply
to save your settings.
D-Link DCS-8000LH User Manual 20