Table of Contents
Advertisement
Recording
Steps:
1.
Select one output window and enter the serial number in the numeric panel, and then click
video of the corresponding cameras will be displayed on the selected window.
2.
Click
to record the video of the selected window, and then the icon will change to
"Start recording" will appear.
to stop recording and the hint of "Stop recording" will appear.
3.
Click
You must connect a USB disk to the keyboard, or ensure the network connection of the PC (running FTP
server) and the keyboard is valid and correct. Run the FTP server on the PC and copy the firmware into the
corresponding directory of your PC.
Two-Way Audio
Steps:
1.
Select one output window and enter the serial number in the numeric panel, and then click
video of the corresponding cameras will be displayed on the selected window.
to start two-way audio and the hint of "Start two-way audio" will appear.
2.
Click
to stop two-way audio and the hint of "Stop two-way audio" will appear.
3.
Click
In video wall live view mode, turn on
corresponding front-end devices if the output channel is DS-B20, or between the keyboard and the decoder if the
output channel is a decoder.
Floating and Matching the Window
Purpose:
For the devices supporting window floating (i.e., DS-B20), you can move the playing window within the video
wall as desired, close the window and adjust the window to match it with the boarders.
The function must be supported by the connected decoding device before using it.
Steps:
1.
Drag a screen which links to a decoding output to open a window.
2.
You can move the playing window within the video wall as desired and adjust its size.
to enable two-way audio between the keyboard and the
57
. The live
. The hint of
. The live
Advertisement
Table of Contents
