Samsung UN40D5550RF E-Manual page 76

● To use a wireless network, your TV must be connected to a wireless IP sharer
(either a router or a modem). If the wireless IP sharer supports DHCP, your TV
can use a DHCP or static IP address to connect to the wireless network.
●
Select a channel for the wireless IP sharer that is not currently being used. If the
channel set for the wireless IP sharer is currently being used by another device
nearby, this will result in interference and communication failure.
● Your TV supports only the following wireless network security protocols:
– Authentication Mode : WEP, WPAPSK, WPA2PSK
▶
– Encryption Type : WEP, TKIP, AES
English
▶